Chapter 3 Tutorial
3.4.2 Activate Periodic Rogue AP Detection
Take the following steps to activate rogue AP detection on the first of your NWAs.
1In the ROGUE AP > Configuration screen, select Enable from the Rogue AP Period Detection field.
Figure 35 Tutorial: Periodic Rogue AP Detection
2In the Period field, enter how often you want the NWA to scan for rogue APs. You can have the NWA scan anywhere from once every ten minutes to once every hour. In this example, enter “10”.
3In the Expiration Time field, enter how long an AP’s entry can remain in the list before the NWA discards it from the list when the AP is no longer active. In this example, enter “30”.
4Click Apply.
60 |
| |
| ||
|
|
|