Chapter 6 AP Controller Mode
6.6 Redundancy Screen
Use this screen to set the controller AP as a primary or secondary controller.
If you set your NWA as a primary controller AP, you can have a secondary controller AP to serve as a backup. All configurations are synchronized between the NWA and the secondary controller AP.
When the NWA is in AP controller mode, click CONTROLLER > Redundancy. The following screen displays.
Figure 66 Redundancy Screen
The following table describes the labels in this screen.
Table 15 Redundancy Screen
LABEL | DESCRIPTION |
Redundancy | Select Enable to set the NWA either as a Primary AP |
| Controller or as a Secondary Controller AP. |
| Select Disable when the NWA acts as a primary AP |
| controller without a backup. |
|
|
Primary AP Controller | Select this if the NWA has a secondary controller AP. You |
| must give the IP address of this backup in the field below. |
|
|
Secondary IP | Enter the IP address of the secondary controller AP. |
|
|
Secondary AP Controller | Select this if the NWA is the secondary controller AP. |
|
|
Apply | Click this to save the changes in this screen. |
|
|
Reset | Click this to return the fields in this screen to their |
| |
|
|
6.7 The Profile Edit Screens
This section describes the Profile Edit screens, which are available only in AP controller mode.
The following Profile Edit screens are identical to those in standalone mode:
102 |
| |
| ||
|
|
|