Chapter 7 System Screens
Once you have decided on the network number, pick an IP address that is easy to remember, for instance, 192.168.1.2, for your device, but make sure that no other device on your network is using that IP address.
The subnet mask specifies the network number portion of an IP address. Your device will compute the subnet mask automatically based on the IP address that you entered. You don't need to change the subnet mask computed by the device unless you are instructed to do otherwise.
7.2 General Screen
Use the General screen to identify your NWA over the network. Click System > General. The following screen displays.
Figure 70 System > General
The following table describes the labels in this screen.
Table 19 System > General
LABEL | DESCRIPTION |
General Setup |
|
|
|
System Name | Type a descriptive name to identify the NWA in the Ethernet |
| network. |
| This name can be up to 30 alphanumeric characters long. Spaces are |
| not allowed, but dashes |
| If you want to log into the NWA using the System Name, enter a |
| name not longer than 15 alphanumeric characters. |
|
|
Domain Name | This is not a required field. Leave this field blank or enter the domain |
| name here if you know it. |
|
|
| 111 |
|
|