Chapter 6 AP Controller Mode
6.4.1 The AP Lists Edit Screen
Use this screen to change the description or radio profile of an AP managed by the NWA. Click Edit in the CONTROLLER > AP Lists screen. The following screen displays.
Figure 64 AP Configuration Screen
The following table describes the labels in this screen.
Table 13 AP Configuration Screen
LABEL | DESCRIPTION |
Model | This is the model number of the managed AP. |
|
|
MAC Address | This is the MAC address of the managed AP. |
|
|
Description | Enter a short description of this access point (up to 32 English |
| keyboard characters). |
|
|
Enable Breathing LED | Select this box to disable the WLAN LED (light). Clear this box to |
| enable the WLAN LED. |
|
|
WLAN1 Radio Profile | Select the radio profile you want to use for this AP. Configure |
| radio profiles in the Profile Edit > Radio screen. |
| Select Disable if you do not want to use a radio profile. The AP’s |
| radio is not active when you select Disable. |
|
|
WLAN2 Radio Profile | Your AP has dual radios. |
| Select the second radio profile you want to use for this AP. |
| Configure radio profiles in the Profile Edit > Radio screen. |
| Select Disable if you do not want to use a second radio profile. |
| The AP’s radio is not active when you select Disable. |
|
|
Apply | Click this to save the changes in this screen. |
|
|
Reset | Click this to return the fields in this screen to their previously- |
| saved values. |
|
|
100 |
| |
| ||
|
|
|