Chapter 7 System Screens
7.3 Password Screen
Use this screen to control access to your NWA by assigning a password to it. Click System > Password. The following screen displays.
Figure 71 System > Password.
Note: Even if you uncheck Enable Admin at Local, you still use the password set here to log in via the console port (not available on all models).
The following table describes the labels in this screen.
Table 20 System > Password
LABEL | DESCRIPTIONS |
Enable Admin at | Select this check box to have the device authenticate local |
Local | management logins to the device. |
|
|
Use old setting | Select this to have the NWA use the local management password |
| already configured on the device (“1234” is the default). |
|
|
Use new setting | Select this if you want to change the local management password. |
|
|
Old Password | Type in your existing system password (“1234” is the default |
| password). |
|
|
New Password | Type your new system password (up to 31 characters). Note that as |
| you type a password, the screen displays an asterisk (*) for each |
| character you type. |
|
|
Retype to | Retype your new system password for confirmation. |
Confirm |
|
|
|
Enable Admin on | Select this (and configure the other fields in this section) to have a |
RADIUS | RADIUS server authenticate management logins to the NWA. |
|
|
Use old setting | Select this to have a RADIUS server authenticate management |
| logins to the NWA using the RADIUS username and password |
| already configured on the device. |
|
|
| 113 |
|
|