Chapter 7 System Screens
Table 20 System > Password
LABEL | DESCRIPTIONS |
Use new setting | Select this if you want to change the RADIUS username and |
| password the NWA uses to authenticate management logon. |
|
|
User Name | Enter the username for this user account. This name can be up to |
| 31 ASCII characters long, including spaces. |
|
|
Password | Type a password (up to 31 ASCII characters) for this user profile. |
| Note that as you type a password, the screen displays a (*) for each |
| character you type. Spaces are allowed. |
| Note: If you are using PEAP authentication in your RADIUS |
| server, this password field is limited to 14 ASCII |
| characters in length. |
|
|
RADIUS | Select the RADIUS server profile of the RADIUS server that is to |
| authenticate management logins to the NWA. |
| The NWA tests the user name and password against the RADIUS |
| server when you apply your settings. |
| • The user name and password must already be configured in the |
| RADIUS server. |
| • You must already have a RADIUS profile configured for the |
| RADIUS server (see Section 11.2 on page 171). |
| • The server must be set to Active in the profile. |
|
|
Apply | Click Apply to save your changes. |
|
|
Reset | Click Reset to reload the previous configuration for this screen. |
114 |
| |
| ||
|
|
|