Chapter 16 Remote Management Screens
To change your NWA’s WWW settings, click REMOTE MGNT > WWW. The following screen shows.
Figure 115 Remote Management: WWW
The following table describes the labels in this screen.
Table 56 Remote Management: WWW
LABEL | DESCRIPTION |
WWW |
|
|
|
Server Port | This is set to port 80 by default. |
| You may change the server port number for a service if needed, |
| however you must use the same port number in order to use that |
| service for remote management. |
|
|
Server Access | Select the interface(s) through which a computer may access the NWA |
| using this service. |
|
|
Secured Client | A secured client is a “trusted” computer that is allowed to communicate |
IP Address | with the NWA using this service. |
| Select All to allow any computer to access the NWA using this service. |
| Choose Selected to just allow the computer with the IP address that |
| you specify to access the NWA using this service. |
|
|
HTTPS |
|
|
|
Server | Select the Server Certificate that the NWA will use to identify itself. |
Certificate | The NWA is the SSL server and must always authenticate itself to the |
| SSL client (the computer which requests the HTTPS connection with the |
| NWA). |
|
|
Authenticate | Select Authenticate Client Certificates (optional) to require the SSL |
Client | client to authenticate itself with the NWA by sending the NWA a |
Certificates | certificate. To do that the SSL client must have a |
| from a CA that has been imported as a trusted CA on the NWA (see the |
| appendix on importing certificates for details). |
|
|
| 201 |
|
|