Chapter 20 VLAN
On an Ethernet switch, create a VLAN that has the same management VLAN ID as the NWA. The following figure has the NWA connected to port 2 and your computer connected to port 1. The management VLAN ID is 10.
Figure 139 Management VLAN Configuration Example
Perform the following steps in the switch web configurator:
1Click VLAN under Advanced Application.
2Click Static VLAN.
3Select the ACTIVE check box.
4Type a Name for the VLAN ID.
5Type a VLAN Group ID. This should be the same as the management VLAN ID on the NWA.
6Enable Transmitted Packets (Tx) Tagging on the port which you want to connect to the NWA. Disable Tx Tagging on the port you are using to connect to your computer.
7Under Control, select Fixed to set the port as a member of the VLAN.
Figure 140
| 251 |
|
|