|
| Chapter 8 Wireless Configuration |
| Table 25 Wireless: AP + Bridge | |
| LABEL | DESCRIPTIONS |
| Enable Antenna | Select this to use antenna diversity. Antenna diversity uses multiple |
| Diversity | antennas to reduce signal interference. |
|
|
|
| Enable Breathing | Select this box to disable the WLAN LED (light). Clear this box to |
| LED | enable the WLAN LED. |
|
|
|
| Enable Spanning | (R)STP (Section 8.4.1 on page 139) detects and breaks network |
| Tree Control (STP) | loops and provides backup links between switches, bridges or |
|
| routers. It allows a bridge to interact with other (R)STP |
|
| bridges in your network to ensure that only one path exists between |
|
| any two stations on the network. Select the check box to activate |
|
| STP on the NWA. |
|
|
|
| Enable Roaming | Roaming allows wireless stations to switch from one access point to |
|
| another as they move from one coverage area to another. Select this |
|
| checkbox to enable roaming on the NWA if you have two or more |
|
| NWAs on the same subnet. |
|
| Note: All APs on the same subnet and the wireless stations must |
|
| have the same SSID to allow roaming. |
|
|
|
| Apply | Click Apply to save your changes. |
|
|
|
| Reset | Click Reset to begin configuring this screen afresh. |
|
|
|
| 135 |
|
|