Chapter 3 Tutorial
8Enter the MAC address of the device Alice uses to connect to the network in Index 1’s MAC Address field and enter her name in the Description field, as shown in the following figure. Change the Profile Name to “MacFilter_SERVER_1”. Select Allow Association from the Filter Action field and click Apply.
Figure 41 Tutorial: MAC Filter Edit (SERVER_1)
You have restricted access to the SERVER_1 network to only the networking device whose MAC address you entered. The SERVER_1 network is now configured.
3.5.5 Configure the SERVER_2 Network
Next, you will configure the SERVER_2 network that allows Bob to access secure server 2 and the Internet.
To do this, repeat the procedure in Section 3.5.4 on page 65, substituting the following information.
Table 7 Tutorial: SERVER_2 Network Information
SSID Screen
Index | 4 |
|
|
Profile Name | SERVER_2 |
|
|
SSID Edit (SERVER_2) Screen |
|
|
|
L2 Isolation | L2Isolation04 |
|
|
MAC Filtering | macfilter04 |
|
|
|
|
Profile Name | |
|
|
Set 1 | MAC Address: 77:66:55:44:33:22 |
| Description: NET_SWITCH |
|
|
Set 2 | MAC Address: 99:88:77:66:55:44 |
| Description: SERVER_2 |
|
|
Set 3 | MAC Address: 66:55:44:33:22:11 |
| Description: GATEWAY |
|
|
68 |
| |
| ||
|
|
|