Chapter 4 Status Screens
The following table describes the labels in this screen.
Table 8 The Status Screen
LABEL | DESCRIPTION |
Automatic Refresh | Enter how often you want the NWA to update this screen. |
Interval |
|
|
|
Refresh | Click this to update this screen immediately. |
|
|
System Information |
|
|
|
System Name | This field displays the NWA system name. It is used for |
| identification. You can change this in the System > General |
| screen’s System Name field. |
|
|
Model | This field displays the NWA’s exact model name. |
|
|
Firmware Version | This field displays the current version of the firmware inside the |
| device. It also shows the date the firmware version was created. |
| You can change the firmware version by uploading new firmware |
| in Maintenance > F/W Upload. |
|
|
System UP Time | This field displays the elapsed time since the NWA was turned on. |
|
|
Current Date Time | This field displays the date and time configured on the NWA. You |
| can change this in the System > Time Setting screen. |
|
|
WLAN1 Operating | This field displays the current operating mode of the first wireless |
Mode | module (AP, Bridge / Repeater, AP + Bridge or MBSSID). |
| You can change the operating mode in the Wireless > Wireless |
| screen. |
|
|
WLAN2 Operating | This field displays the current operating mode of the second |
Mode | wireless module (AP, Bridge / Repeater, AP + Bridge or |
| MBSSID). You can change the operating mode in the Wireless |
| > Wireless screen. |
|
|
Management VLAN | This field displays the management VLAN ID if VLAN is active, or |
| Disabled if it is not active. You can enable or disable VLAN, or |
| change the management VLAN ID, in the VLAN > Wireless |
| VLAN screen. |
|
|
IP | This field displays the current IP address of the NWA on the |
| network. |
|
|
LAN MAC | This displays the MAC (Media Access Control) address of the NWA |
| on the LAN. Every network device has a unique MAC address |
| which identifies it across the network. |
|
|
WLAN1 MAC | This displays the MAC address of the first wireless module. |
|
|
WLAN2 MAC | This displays the MAC address of the second wireless module. |
|
|
System Resources |
|
|
|
Flash | This field displays the amount of the NWA’s flash memory |
| currently in use. The flash memory is used to store firmware and |
| SSID profiles. |
|
|
Memory | This field displays what percentage of the NWA’s volatile memory |
| is currently in use. The higher the memory usage, the more likely |
| the NWA is to slow down. Some memory is required just to start |
| the NWA and to run the web configurator. |
|
|
CPU | This field displays what percentage of the NWA’s processing |
| ability is currently being used. The higher the CPU usage, the |
| more likely the NWA is to slow down. |
|
|
84 |
| |
| ||
|
|
|