Chapter 16 Remote Management Screens
Table 57 Remote Management: SNMP
LABEL | DESCRIPTION |
SNMP Version | Select the SNMP version for the NWA. The SNMP version on the NWA |
| must match the version on the SNMP manager. Choose SNMP version |
| 1 (SNMPv1), SNMP version 2 (SNMPv2) or SNMP version 3 |
| (SNMPv3). |
|
|
Trap Community | Type the trap community, which is the password sent with each trap |
| to the SNMP manager. The default is “public” and allows all requests. |
| This field is available only when SNMPv1 or SNMPv2 is selected in |
| the SNMP Version field. |
|
|
User Profile | This field is available only when you select SNMPv3 in the SNMP |
| Version field. |
| When sending SNMP v3 traps (messages sent independently by the |
| SNMP agent) the agent must authenticate the SNMP manager. If the |
| SNMP manager does not provide the correct security details, the |
| agent does not send the traps. |
| The NWA has two SNMP version 3 login accounts, User and Admin. |
| Each account has different security settings. You can use either |
| account’s security settings for authenticating SNMP traps. |
| Select User to have the NWA use the User account’s security |
| settings, or select Admin to have the NWA use the Admin account’s |
| security settings. |
| Use the Configure SNMPv3 User Profile link to set up each |
| account’s security settings. |
|
|
Configure | Click this to go to the SNMPv3 User Profile screen, where you can |
SNMPv3 User | configure administration and user login details. |
Profile | Refer to Section 16.5.1 on page 205 to see this screen. |
| |
|
|
SNMP |
|
|
|
Service Port | This is set to port 161 by default. |
| You may change the server port number for a service if needed, |
| however you must use the same port number in order to use that |
| service for remote management. |
|
|
Service Access | Select the interface(s) through which a computer may access the |
| NWA using this service. |
|
|
Secured Client IP | A secured client is a “trusted” computer that is allowed to |
Address | communicate with the NWA using this service. |
| Select All to allow any computer to access the NWA using this |
| service. |
| Choose Selected to just allow the computer with the IP address that |
| you specify to access the NWA using this service. |
|
|
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
204 |
| |
| ||
|
|
|