WARNING: RISK OF ELECTRICAL SHOCK
WHAT CAN HAPPEN | HOW TO PREVENT IT |
INSTALLATION
Pressure Washer Assembly (Fig. 1)
1. Place handle assembly (A) onto frame, depress 
the snap buttons, and slide the handle assembly onto the frame (B) until snap buttons are secured
•Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.
•Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.
in place.
CAUTION: Risk of personal injury. Avoid placing hands between handle and frame when assembling to prevent pinching.
2. Attach 
hose (C) to quick 
connect spray gun
English
WARNING: RISK OF INJURY FROM LIFTING
WHAT CAN HAPPEN | HOW TO PREVENT IT |
(D). NOTE: Two hoses 
(25' and 50') are 
supplied, these hoses 
can be connected 
•Serious injury can result from attempting to lift too heavy an object.
•The pressure washer is too heavy to be lifted by one person. Obtain assistance from others before lifting.
together or used separately. Make sure all connections are secure.
3. Connect quick connect spray wand (E) to spray gun. NOTE: An |
extension wand is also supplied with this unit, to use the exten- |
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
sion wand: Connect the extension wand to the spray gun and |
then connect the quick connect spray wand to the extension |
wand. Make sure all connections are secure. |
4. Remove the set screw |
from spray gun exten-
sion using a 3/16" hex 
wrench.
5. Thread the side han- dle (R) into spray gun
extension and tighten to desired position.
9