European Union EMC Directive conformance statement
This product is in conformity with the protection requirements of EU Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM can- not accept responsibility for any failure to satisfy the protection requirements resulting from a non- recommended modification of the product, including the fitting of
This product has been tested and found to comply with the limits for Class A Information Technology Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment were derived for commercial and industrial environments to provide reasonable protection against inter- ference with licensed communication equipment.
Attention: This is a Class A product. In a domestic environment this product may cause radio interfer- ence in which case the user may be required to take adequate measures.
Taiwan electronic emission statement
Chinese Class A warning statement
Statement of Conformity to the Voluntary Control Council for Interference from Informa- tion
Power Cords
For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
IBM power cords used in the United States and Canada are listed by Underwriter's Laboratories (UL) and certified by the Canadian Standards Association (CSA).
For units intended to be operated at 115 volts: Use a
For units intended to be operated at 230 volts (U.S. use): Use a
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a
IBM power cords for a specific country or region are usually available only in that country or region.
60