Fujitsu 4Gbit/s FC I/O Modules manual Installing *****port Miniport Driver

Installing *****port Miniport Driver

1Click the "Start" button → "Administrative Tools" → "Computer Management" in this order.

2Click [Device Manager].

3Select "Emulex **********" in the "SCSI and RAID controllers" or "Other devices" list and double-click it.

￿If the displayed name is "Emulex LightPulse ***** Storport Miniport Driver" and the driver version is "5.1.30.9" or "7.1.30.9" , the driver will be installed, please close the properties screen.

4Click the [Driver] tab and click [Update Driver].

"Welcome to the Hardware Update Wizard" starts.

If the "Can Windows connect to Windows Update to search for software?" window appears, select "No, not this time" and click [Next].

5Check "Install from a list or specific location", and click [Next].

6Select "Don't search, I will choose the driver to install", and click [Next].

When the [Hardware type] screen appears, select [SCSI and RAID controllers] and click [Next].

7Click [Have Disk].

8Insert the driver disk (CD-ROM) into the CD-ROM drive.

9Specify the following folder in the CD-ROM drive for "File copy source of the manufacturer", and click [OK].

•For 32Bit

[CD-ROM drive]: \v1.30a9\AutoPilot Installer\Drivers\Sporport\x86

• For 64Bit

[CD-ROM drive]: \v1.30a9\AutoPilot Installer\Drivers\Sporport\x64 The "Display compatible hardware" window appears.

10Select "Emulex LightPulse HBA - Storport Miniport Driver", and click [Next].

Installation starts.

11Click [Finish].

56