Fujitsu 4Gbit/s FC I/O Modules manual Specifications

Page 8

1.2Specifications

This product is an expansion board used in order to install fiber channel interface on the server blade. This product has the following features:

•Capable of high-speed data transfer at a maximum rate of 4Gbps.

•You can place the connected device away from the server.

•Uses thin and light cables so they can be easily connected.

The following shows the specifications of this product:

Item	Functions and Specifications

Product name	4Gbit/s FC I/O Module

Product ID	PG-FCD201

Function	Fabric/FC-AL (Arbitrated Loop)

Number of channels (ports)	1 channel (2 ports)

Host bus interface	PCI-Express 1.0a

External interface	1/2/4Gbps (Automatic recognition)
	Fibre channel (Optical cable)
	LC connector/non-OFC/multimode

46

Image 8

Contents Before Reading This Manual Key Descriptions / Operations SymbolsEntering Commands Keys Abbreviations Handling this productChecking the Items Supplied Contents Page 4Gbit/s FC I/O Module OverviewSpecifications How to Check the Driver Version Points to Note When Using This Driver 4Gbit/s FC I/O Module to Eternus ConnectionsFabric connection Event logInstalling the 4Gbit/s FC I/O Module Installing in a Server BladeInstallation Position of the 4Gbit/s FC I/O Module Remove the top coverInstall the 4Gbit/s FC I/O Module Install the server blade in the chassisSecure the 4Gbit/s FC I/O Module with the screws Attach the top coverConnecting Cables This chapter explains points to note when connecting cablesInstalling Drivers and Utilities Automatic InstallationClick Finish Select Emulex PLUS, and click Next Click Next Click Finish Manual InstallationInstalling Emulex Plus Installing *****port Miniport Driver Click the Driver tab and click Update DriverCheck the driver version Close the board property windowCheck the Revision value in Functional Firmware is Checking and Updating Firmware / BootBIOSClick Download Click the Download button Using HBAnyware Utility Click Update Firmware... in FirmwareClick the Update Firmware... in Firmware Uninstalling HBAnywareUninstalling AutoPilot Installer 4Gbit/s FC I/O Module Details Setting 4Gbit/s FC I/O Module Setting Double-click QueueDepth in Parameters FC-ALSet a value in New Value, check Permanent, and click Change Check the parameters that have been set 4Gbit/s FC I/O Module Details Setting Select the local server, and click the Driver Parameters tab Connection type Value For ETERNUS4000 model 300/500 and ETERNUS8000 Specify Follow the paths below Registry SettingAfter finishing all the settings, restart the server blade Checking the Link Status TroubleshootingHow to start the Light Pulse Bios Utility Troubleshooting Correctly? Guide provided with the serverAppendix a How to Identify the Adapter This chapter explains how to identify the adapterAppendix B Contact Information Page Issued on 発行責任