Fujitsu 4Gbit/s FC I/O Modules manual Double-click QueueDepth in Parameters, Fc-Al

Page 26

4Select the adapter for which settings are changed from the adapter list on the left of the window, and double-click "Topology" in "Parameters".

When there are two or more adapters, refer to "Appendix A How to Identify the Adapter" (pg.74).

5Set a value for "New Value" depending on the connection type, check "Permanent", and click [Change].

When the connection type varies for each adapter, remove the check from the "Global" checkbox.

Connection type	New Value

FC-AL	0

Fabric	1

• When all the installed adapters are FC-AL connection:

• When only the adapter under setting is Fabric connection:

6Double-click "QueueDepth" in "Parameters".

64

Image 26

Contents Before Reading This Manual Key Descriptions / Operations SymbolsEntering Commands Keys Abbreviations Handling this productChecking the Items Supplied Contents Page 4Gbit/s FC I/O Module OverviewSpecifications How to Check the Driver Version Fabric connection Points to Note When Using This Driver4Gbit/s FC I/O Module to Eternus Connections Event logInstalling the 4Gbit/s FC I/O Module Installing in a Server BladeInstallation Position of the 4Gbit/s FC I/O Module Remove the top coverSecure the 4Gbit/s FC I/O Module with the screws Install the 4Gbit/s FC I/O ModuleInstall the server blade in the chassis Attach the top coverConnecting Cables This chapter explains points to note when connecting cablesInstalling Drivers and Utilities Automatic InstallationClick Finish Select Emulex PLUS, and click Next Click Next Click Finish Manual InstallationInstalling Emulex Plus Installing *****port Miniport Driver Click the Driver tab and click Update DriverCheck the driver version Close the board property windowCheck the Revision value in Functional Firmware is Checking and Updating Firmware / BootBIOSClick Download Click the Download button Using HBAnyware Utility Click Update Firmware... in FirmwareClick the Update Firmware... in Firmware Uninstalling HBAnywareUninstalling AutoPilot Installer 4Gbit/s FC I/O Module Details Setting 4Gbit/s FC I/O Module Setting Double-click QueueDepth in Parameters FC-ALSet a value in New Value, check Permanent, and click Change Check the parameters that have been set 4Gbit/s FC I/O Module Details Setting Select the local server, and click the Driver Parameters tab Connection type Value For ETERNUS4000 model 300/500 and ETERNUS8000 Specify Follow the paths below Registry SettingAfter finishing all the settings, restart the server blade Checking the Link Status TroubleshootingHow to start the Light Pulse Bios Utility Troubleshooting Correctly? Guide provided with the serverAppendix a How to Identify the Adapter This chapter explains how to identify the adapterAppendix B Contact Information Page Issued on 発行責任