Fujitsu 4Gbit/s FC I/O Modules Using HBAnyware Utility, Click Update Firmware... in Firmware

Page 22

4.3.2Using HBAnyware Utility

This product name displayed in HBAnyware Utility is "BX600-FC42E - 10:00:**:**:**:**:**:**". The "**:**:**:**:**:**" shows the IEEE address of the 4Gbit/s FC I/O Module. Each 4Gbit/s FC I/ O Module has a unique IEEE address, which is written on the sticker on each 4Gbit/s FC I/O Module.

1Click the "Start" button → "Programs" or "All Programs" → "Emulex" → "HBAnyware" in this order.

2Select the target 4Gbit/s FC I/O Module, and click the "Firmware" tab.

For PG-FCD201, two BX600-FC42E are displayed.

3For the firmware version, check the "Current Firmware Version:" value in "Firmware".

•When the version is "2.70x6", proceed to Step 8.

•When the version is other than "2.70x6", proceed to Step 4.

4Click "Update Firmware..." in "Firmware".

When the confirmation dialog appears, click [Yes].

5Insert the driver disk (CD-ROM) into the CD-ROM drive, select the Firmware file in the CD-ROM drive, and click [Start Download].

[CD-ROM drive]:\FirmBIOS\zf2.70x6.all

6When the Firmware update is completed, click [Close].

7Check that the "Current Firmware Version:" value in "Firmware" is "2.70x6".

60

Image 22

Contents Before Reading This Manual Entering Commands Keys SymbolsKey Descriptions / Operations Abbreviations Handling this productChecking the Items Supplied Contents Page 4Gbit/s FC I/O Module OverviewSpecifications How to Check the Driver Version Fabric connection Points to Note When Using This Driver4Gbit/s FC I/O Module to Eternus Connections Event logInstalling the 4Gbit/s FC I/O Module Installing in a Server BladeInstallation Position of the 4Gbit/s FC I/O Module Remove the top coverSecure the 4Gbit/s FC I/O Module with the screws Install the 4Gbit/s FC I/O ModuleInstall the server blade in the chassis Attach the top coverConnecting Cables This chapter explains points to note when connecting cablesInstalling Drivers and Utilities Automatic InstallationClick Finish Installing Emulex Plus Manual InstallationSelect Emulex PLUS, and click Next Click Next Click Finish Installing *****port Miniport Driver Click the Driver tab and click Update DriverCheck the driver version Close the board property windowClick Download Checking and Updating Firmware / BootBIOSCheck the Revision value in Functional Firmware is Click the Download button Using HBAnyware Utility Click Update Firmware... in FirmwareUninstalling AutoPilot Installer Uninstalling HBAnywareClick the Update Firmware... in Firmware 4Gbit/s FC I/O Module Details Setting 4Gbit/s FC I/O Module Setting Double-click QueueDepth in Parameters FC-ALSet a value in New Value, check Permanent, and click Change Check the parameters that have been set 4Gbit/s FC I/O Module Details Setting Select the local server, and click the Driver Parameters tab Connection type Value For ETERNUS4000 model 300/500 and ETERNUS8000 Specify After finishing all the settings, restart the server blade Registry SettingFollow the paths below How to start the Light Pulse Bios Utility TroubleshootingChecking the Link Status Troubleshooting Correctly? Guide provided with the serverAppendix a How to Identify the Adapter This chapter explains how to identify the adapterAppendix B Contact Information Page Issued on 発行責任