5.2Registry Setting
1Click the "Start" button → "Run..." in this order.
2Enter a name in "Name" as follows, and click [OK].
regedit
The registry editor starts.
3Follow the paths below.
\HKEY_LOCAL_MACHINE \SYSTEM
\CurrentControlSet
\Services
\Disk
4Check that the key name "TimeOutValue" values have the relations described in the table below.
If there is no value in the "TimeOutValue", add it as follows:
- Data type | : REG_DWORD (DWORD type) |
- The name of the value | : TimeOutValue |
-The data of the value : (Refer to the following table)
- Base: Hexadecimal
Table: values in the "TimeOutValue"
Product names | Connection configuration | |
|
| |
| Single connection | Cluster configuration |
|
|
|
Windows Server 2003 | 3c (hexadecimal) | 3c (hexadecimal) |
|
|
|
5After finishing all the settings, restart the server blade.
After configuring the cluster, recheck these settings. If the settings are incorrect, perform the setting again.
E