Fujitsu 4Gbit/s FC I/O Modules manual Uninstalling HBAnyware, Uninstalling AutoPilot Installer

8For the BootBIOS version, check the "BootBIOS" value in "Boot BIOS".

•When the version is "1.70a3", proceed to Step 13.

•When the version is other than "1.70a3", proceed to Step 9.

9Click the "Update Firmware..." in "Firmware".

When the confirmation dialog appears, click [Yes].

10Insert the driver disk (CD-ROM) into the CD-ROM drive, select the BootBIOS file in the CD-ROM drive, and click [Start Download].

[CD-ROM drive]:\FirmBIOS\ZB170A3.PRG

11When the Firmware update is completed, click [Close].

12Check that the "BootBIOS" value in "BootBIOS" is "1.70a3".

For PG-FCD201, perform the above procedures for all adapters.

13After checking versions of all 4Gbit/s FC I/O Module, restart the server blade to enable the settings, and proceed to "5 4Gbit/s FC I/ O Module Details Setting" (￿pg.62).

Perform the above procedures for each 4Gbit/s FC I/O Module.

￿When replacing this product, perform "4.3 Checking and Updating Firmware / BootBIOS" (￿pg.58) again as necessary.

4.4Uninstalling HBAnyware

1Click the "Start" menu → "Settings" → "Control Panel" → "Add or Remove Programs" or "Add/Remove Programs" in this order.

2Select "Emulex Fibre Channel HBAnyware Version 3.1a8", and click [Change/Remove] or [Remove].

3Follow the displayed instructions to uninstall.

4.5Uninstalling AutoPilot Installer

1Click the "Start" menu → "Settings" → "Control Panel" → "Add or Remove Programs" or "Add/Remove Programs" in this order.

2Select "Emulex *****port Miniport Driver Package ******-1b", and click [Change/Remove] or [Remove].

3Follow the displayed instructions to uninstall.

E

4 Installing Drivers and Utilities 61