Fujitsu 4Gbit/s FC I/O Modules manual Set a value in New Value, check Permanent, and click Change

7Set a value in "New Value", check "Permanent", and click [Change].

When the settings vary for each adapter, remove the check on the "Global". The setting value is calculated as follows:

For ETERNUS3000 model 50/GR710/GR720/GR730/GR740/GR820/GR840

•For cluster (MSCS/SynfinityCluster): "8"

•For other than cluster (MSCS/SynfinityCluster)

•When one HBA is connected to one FC-CA (FC port): "16"

•When two HBAs are connected to one FC-CA (FC port): "8"

For ETERNUS3000 model 80/100/200/300/400/500/600/700 and

ETERNUS4000 model 80/100

Setting value (rounding down decimals) = 40/ (number of 4Gbit/s FC I/O Module connected to one CA port)

When the calculated value is 8 or less, specify "8".

For ETERNUS6000 model 400/500/600/700/800/900/1000/1100

Specify "40".

For ETERNUS4000 model 300/500 and ETERNUS8000

Specify "255".

• When the setting value for all the installed adapters is "8":

• When the setting value for only the adapter under setting is "40":

E

5 4Gbit/s FC I/O Module Details Setting 65