Fujitsu 4Gbit/s FC I/O Modules manual 4Gbit/s FC I/O Module Details Setting

Page 29

• When Topology is 0, QueueDepth is 8, and QueueTarget is 1 for all the adapters:

13When the settings for all adapters finishes, select "Exit" from "File" menu, and exit LightPulse Utility/NT.

After exiting LightPulse Utility/NT perform "5.2 Registry Setting" (pg.71).

E

5 4Gbit/s FC I/O Module Details Setting 67

Image 29

Contents Before Reading This Manual Key Descriptions / Operations SymbolsEntering Commands Keys Handling this product AbbreviationsChecking the Items Supplied Contents Page Overview 4Gbit/s FC I/O ModuleSpecifications How to Check the Driver Version 4Gbit/s FC I/O Module to Eternus Connections Points to Note When Using This DriverFabric connection Event logInstalling in a Server Blade Installing the 4Gbit/s FC I/O ModuleRemove the top cover Installation Position of the 4Gbit/s FC I/O ModuleInstall the server blade in the chassis Install the 4Gbit/s FC I/O ModuleSecure the 4Gbit/s FC I/O Module with the screws Attach the top coverThis chapter explains points to note when connecting cables Connecting CablesAutomatic Installation Installing Drivers and UtilitiesClick Finish Select Emulex PLUS, and click Next Click Next Click Finish Manual InstallationInstalling Emulex Plus Click the Driver tab and click Update Driver Installing *****port Miniport DriverClose the board property window Check the driver versionCheck the Revision value in Functional Firmware is Checking and Updating Firmware / BootBIOSClick Download Click the Download button Click Update Firmware... in Firmware Using HBAnyware UtilityClick the Update Firmware... in Firmware Uninstalling HBAnywareUninstalling AutoPilot Installer 4Gbit/s FC I/O Module Details Setting 4Gbit/s FC I/O Module Setting FC-AL Double-click QueueDepth in ParametersSet a value in New Value, check Permanent, and click Change Check the parameters that have been set 4Gbit/s FC I/O Module Details Setting Select the local server, and click the Driver Parameters tab Connection type Value For ETERNUS4000 model 300/500 and ETERNUS8000 Specify Follow the paths below Registry SettingAfter finishing all the settings, restart the server blade Checking the Link Status TroubleshootingHow to start the Light Pulse Bios Utility Correctly? Guide provided with the server TroubleshootingThis chapter explains how to identify the adapter Appendix a How to Identify the AdapterAppendix B Contact Information Page 発行責任 Issued on