Fujitsu 4Gbit/s FC I/O Modules manual Appendix a How to Identify the Adapter

Appendix A How to Identify the Adapter

This chapter explains how to identify the adapter.

Each 4Gbit/s FC I/O Module has an IEEE Address. The IEEE Address is on a sticker on the front or rear of this product. For PG-FCD201, there are two adapters and two IEEE Addresses. Due to this there are two IEEE address labels. The IEEE Address value mentioned indicates the IEEE Address

**********. In the following diagram the IEEE Address is "0000C93CC778".

IEEE ADDRESS 0000C93CC778

The procedures to check the IEEE Address on LightPulse Utility/NT are as follows:

1Click the "Start" button → "Programs" or "All Programs" → "Emulex" → "lpUtilNT" in this order.

2Select the 4Gbit/s FC I/O Module to check the IEEE Address from the list on the left of the window, select "Adapter Revision Levels" in the "Category" field.

The value of "IEEE Address" (Revision) in "Component" is the IEEE Address of the 4Gbit/s FC I/O Module. In the above example, the IEEE Address is "00-00-C9-3C-C7-78".

￿In the diagram above, if the IEEE Address applied to this product is "00-00-C9-3C-C7-78", the adapter name displayed on LightPulse Utility /NT is "Adapter 0 -BX 600-FC42E Port1".

74