Fujitsu 4Gbit/s FC I/O Modules manual Select the local server, and click the Driver Parameters tab

5.1.2Using HBAnyware Utility

This product name displayed in HBAnyware Utility/NT is "BX600FC42E - - 10:00:**:**:**:**:**:**".

The "**:**:**:**:**:**" shows the IEEE address of the 4Gbit/s FC I/O Module. Each 4Gbit/s FC I/ O Module has a unique IEEE address, which is written on the sticker on each 4Gbit/s FC I/O Module. For PG-FCD201, there are two adapters and two IEEE Addresses. Due to this there are two IEEE address labels.

1Click the "Start" button → "Programs" or "All Programs" → "Emulex" → "HBAnyware" in this order.

￿When adding this product after installation, the settings for the existing product may be changed. Therefore, after adding this product or driver, check the detailed settings and correct them if necessary.

2Select the local server, and click the "Driver Parameters" tab.

If the setting value varies for each adapter, select the adapter to be set, and click [Driver Parameters].

•When selected the local server and "Driver Parameters" (common setting for all adapters)

For PG-FCD201, two BX600-FC42E are displayed.

68