XP SBC HC 210.1 SRS
Troubleshooting | Specifications* | ||
| Maintenance | – If the headphone will not be used for a longer time, | |
|
| please remove the batteries to prevent leakage and | |
|
| corrosion. | |
|
| – Only replace the batteries with Philips SBC HB550S | |
|
| batteries. | |
|
| – Do not leave the headphone near heat sources. Do | |
|
| not expose to direct sunlight, excessive dust, moisture, | |
|
| rain or any kind of mechanical shock. | |
|
| – Do not use alcohol, thinner or | |
|
| substances to clean the headphone or transmitter. Use a | |
|
| slightly dampened chamois cloth to clean the housing. | |
|
| – Do not use cleaning agents containing alcohol, spirits, | |
|
| ammonia or abrasives as these may harm the housing. |
|
English
Hearing Safety! Continuous use at a high volume may permanently damage your hearing.
System: | Infra Red (IR) | |
|
|
|
Modulation: | Frequency Modulation (FM) | |
|
|
|
Effective Transmission Range: | 7 meters max. range (depending on ambient conditions | |
| and restricted to line of sight w.r.t. the transmitter) | |
|
|
|
Input level: | 800 mVrms (1 kHz sine wave) | |
|
|
|
Power supply – transmitter: | 12Volt / 200 mA DC, centre positive | |
|
|
|
Power supply – headphone: | 2x 1.2V RO3 (AAA) | |
| Philips SBC HB550S batteries (NiMH) | |
|
|
|
Carrier Frequency |
|
|
(Headphone): | 2.3 Mhz (L), 2.8 Mhz (R) | |
|
|
|
Signal/Noise ratio: | > 55 dB (1 kHz sine wave , | |
|
|
|
Distortion: | < 1% THD | |
|
|
|
Channel separation: | > 30 dB | |
| is a trademark of SRS Labs, Inc. |
Headphone technology is incorporated under license from SRS Labs, Inc.
*) All specifications are subject to change without prior notice.
9