Extron electronic PVS 305SA manual Room layout, Typical classroom installation

Before you Begin Installation - Planning

Before installation is started, several major factors must be considered to ensure that the installation process is as smooth and trouble free as possible, and that the final finished project meets the needs of the customers, users, audiences, and installer.

The installation consideration on the following pages, though not comprehensive, should be consulted to help ensure that key aspects have been considered.

1.Room layout

a.The room

The application diagram below shows a typical classroom installation.

PoleVault System

Typical classroom installation

Room factors to be considered should include, but are not confined to:

•Room size, orientation, and layout:

Audience factors (e.g. number, ADA requirements, seating arrangements)

Existing installed furniture (bookcases, racks, cabinets, workbenches, sinks, etc.)

Windows, doors, and support pillar locations in relationship to the proposed screen location

•Ceiling and wall type (important in assessing the installation hardware needed)

Ceiling type: dropped, spline, hard lid etc., structural type (wood, concrete, trusses), plenum or non-plenum

Wall type: drywall, cement, brick, etc.

WCheck the structural ceiling to ensure that it can handle a load four times the weight of the final setup.

PoleVault Systems Installation • Introduction — Planning 1-3