SpectraLink 8000 Telephony Gateway Administration Guide
Navigate to the NetLink Wireless Telephone System menu for the
SpectraLink 8000 Telephony Gateway and select Feature
Programming. A screen similar to the following displays:
Programming Digital PBX Features
The numbers and symbols along the left side of the screen indicate which number or digit key is being pressed after the FCN key to activate the feature.
1.Navigate to key 1 and type MUTE.
2.If a SpectraLink 8000 OAI Gateway is part of the system, navigate to the key the OAI function is to be assigned to and type OAI.
3.See below for programming the ADMIN feature.
All other digital features are programmed in the PBX per the LinkPlus
Interface Guide for your system.
Programming Analog PBX Features
For analog systems, follow the above steps for digital programming, then proceed with the steps below:
1.The table below displays the default menu options that are programmed into the handsets for an analog system. You may set these same functions here or change them to something else. If
74 | PN: |