AY | <P=001> |
|
2 INITIAL SETTINGS
A LOOK AT THE OPERATION PANEL
Before you can begin using your fax machine, there is some information that must be set using the keys on the operation panel. First take a moment to familiarize yourself with the operation panel, and then set the information as explained on the following pages.
LINE STATUS light This lights when the fax machine is using the telephone line.
Display
This displays various messages during operation and programming.
IN USE | STANDARD |
FINE
SUPER FINE
HALF TONE
CHANGEOVER
RESOLUTION key
Press this key to adjust the resolution before sending or copying a document.
Service indicator This lights when a problem occurs which must be fixed by a service engineer.
Drum cartridge indicator This blinks when the drum cartridge nears the end of its life, and lights steadily when the drum cartridge needs replacement.
Toner cartridge indicator This blinks when toner nears empty, and lights steadily when the toner/developer cartridge needs replacement.
CHANGEOVER key
Two types of information appear in the display: prompts related to operations you are performing, and information about how the fax is using the telephone line (transmitting, receiving, etc.). Press this key to switch between the two types of information.
Paper out indicator
This blinks when one of the paper sources (cassette or tray) is out of paper, and lights steadily when all sources are out of paper.
INITIAL SETTINGS |