<P=002>
OPTIONAL SETTINGS
Setting 4: ACTIVITY REPORT AUTO PRINT OUT
Press "1" (YES) to have your fax automatically print an Activity Report once every 30 send/receive operations. (The report can still be printed on demand at any time.) Press "2" (NO) to turn automatic
∙Factory setting: "2"
Setting 5: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number from "1" to "5" as follows:
"1" (ERROR/TIMER/ MEMORY):
"2" (SEND ONLY):
"3" (ALWAYS PRINTS):
"4" (NEVER PRINTS): "5" (ERROR ONLY):
A report will be printed after an error, timer operation, or memory operation.
A report will be printed only after a transmission.
A report will be printed after each transmission, reception, or error.
A report will never be printed.
A report will be printed only after an error occurs.
∙Factory setting: "5"
Setting 6: RECALL TIMES
This sets the maximum number of times your fax will automatically redial if the line is busy. Enter any number from "00" to "14".
∙Factory setting: "02"
Setting 7: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic redials when the line is busy. Enter "01" for 1 minute, "02" for 2 minutes, etc., up to a maximum of 15 minutes.
∙Factory setting: "05"
Setting 8: SECURITY SELECTION
Press "1" (ON) to turn polling security on, or "2" (OFF) to turn it off.
∙Factory setting: "1"
Setting 9: ERROR CORRECTION MODE (ECM)
Press "1" (YES) to have any distortions in a transmission due to noise on the telephone line be corrected before the document is printed out. This is only effective when the other machine has ECM as well. Press "2" (NO) to turn the function off.
∙Factory setting: "1"
Setting 10: AUTO COVER SHEET
Press "1" (YES) to have the fax automatically generate a cover sheet and send it as the last page of each transmission. Press "2" (NO) to turn the function off.
∙Factory setting: "2"
OPTION SETTINGS |