Sharp UX-5000 operation manual Relay Broadcast

<P=005>

RELAY REQUEST

Relay Broadcast

Your fax can also act as a relay station. It will receive a document from a fax machine making a relay request, and automatically broadcast it to the stations which the requesting machine specifies.

In order for a fax machine to make a relay request, you must first give it permission by storing its fax number in the Relay Passcode List. Follow the steps below to store or clear a fax number.

♦When your fax receives a relay request from another fax machine, RCVD RELAY REQUEST will appear in the display.

♦If the telephone billing function is turned on, the fax cannot act as a relay station.

♦To clear a fax number from the Relay Passcode List, you need to know the 2-digit number which identifies it. You can check this by printing out the Passcode List (see Chapter 6).

Step	Press these keys:						Comments
1		RELAY
		U					RELAY FUNCTION will appear in the display.
2		4					RELAY PASSCODE will appear in the display.
3		1		or	2		Press "1" to store a number, or "2" to clear a
							number.
							Storing: Enter a 2-digit number ("01" to "10").
		0		1			This identifies the fax number you will enter in
4							the next step.
							Clearing: Enter the 2-digit number which
					(Example)		identifies the fax number you want to clear, and
							go to Step 6.
5	0	1	2	3	4	5	Enter the fax number of the machine to be
					(Example)
							stored in the list (max. 20 digits).
		START
6
				STOP			Return to Step 4 to enter another number, or
7
	Step 4 or						press STOP one or more times until you return
							to the date and time display.

SPECIAL FUNCTIONS 4-11