Sharp UX-5000 operation manual Clearing a relay group

<P=003>

RELAY REQUEST

	0	1	2	3	4	5	Enter a full fax number (skip this step if you don’t
							want to enter full numbers). Include the area
13							code (for example "201") if the number is outside
							of the calling area of the relay unit, and "1" for a
							long distance call. Also include the dial prefix
							(such as "9") for an outside line if you are on a
					(Example) PBX.
		START
14							Press START and go back to Step 13 if you
							want to enter another full number.
		START
15
			STOP				Return to Step 3 to enter another relay group, or
16
	Step 3 or						press STOP one or more times until you return
							to the date and time display.

Clearing a relay group

To clear a relay group, you need to know the 2-digit number which identifies it. You can check this by printing out the Relay Group List as described in Chapter 6.

Step	Press these keys:			Comments
1	RELAY			RELAY FUNCTION will appear in the display.
	U
2	3			RELAY GROUP CLEAR will appear in the
				display.
3	1	0	(Example)	Enter the 2-digit number identifying the group
				you want to clear.
	START
4
		STOP		Return to Step 3 to clear another relay group, or
5
	Step 3 or			press STOP one or more times until you return
				to the date and time display.

SPECIAL FUNCTIONS 4-9