Sharp UX-5000 operation manual Storing Numbers in Group Keys

<P=004>

STORING NUMBERS FOR AUTOMATIC DIALING

Storing Numbers in Group Keys

Group Keys allow you to dial a group of fax numbers automatically by simply pressing the appropriate Group Key once. Group Keys are convenient for the Broadcasting and Serial Polling functions, which are used to transmit to or receive from a group of other fax machines.

Any Rapid Key which is not already programmed as a Rapid Key or Program Key can be used as a Group Key. To program or clear a Group Key, follow the steps below.

♦Up to 147 fax numbers can be stored in one Group Key.

♦Only Rapid Keys and Speed Dial numbers (excluding numbers specified as Chain Dialling numbers) can be stored in a Group Key. No full numbers can be stored.

Step	Press these keys:								Comments
1	FUNCTION						7		"PROGRAM/GROUP MODE" will appear in the
									display.
2				2					"GROUP ENTRY MODE" will appear in the
									display.
3		1				or	2		Press "1" (SET) to program a Group Key, or "2"
									(CLEAR) to clear a Group Key.
									Press any Rapid Key not already being used to
		2
									select it as a Group Key.
4
			B
								(Example)	If you are clearing a Group Key, press it and go
									to Step 6.
						…			Enter fax numbers using one or both of the
									following methods:
	1	2					3
	A
			B					C	∙ Press one or more Rapid Keys.
5								START	∙ Enter one or more Speed Dial numbers with
	SPEED DIAL			1					the numeric keys, pressing SPEED DIAL
									before each number (if you enter less than
								(Example)	3 digits for a number, press START to
									complete the entry).
				START
6
					STOP				Return to Step 4 to enter another number, or
7
	Step 4 or								press STOP one or more times until you return
									to the date and time display.

2-10 INITIAL SETTINGS