Sharp UX-B800SE Error messages, Can show images in the selected format, Sending a message only

Page 24

Fax to E-mail Transmission

can show images in the selected format.)

•FILE NAME: Enter a name for the scanned file (max. 40 characters).

When finished, press .

6When you have finished configuring the e-mail options, press

. (If the display shows [PRESS START TO SCAN], it is not necessary to press

.)

7Press to begin transmission.

Note: The recipient may have security settings in their e-mail program or virus protection software that prevent the file attachment from being received or opened. In this case, ask the recipient to try changing the settings.

Sending a message only

You can also send a short e-mail message without including a document. Perform Steps 3 through 7 of the above procedure (enter the message in Step 5). After Step 7, [SEND W/O DOCUMENT?] / [1=YES,2=NO,W/T DOC.]

will appear. Press to select “YES”. The message will be sent.

Error messages

If transmission is not successful because the machine is unable to connect to your mail server, one of the following error messages will appear.

[CONNECTION ERROR]

This appears when communication does not take place correctly on your local network, usually due to a problem with the cable connections. Make sure that the cable ends are securely inserted in the LAN ports. Make sure that the correct cable is being used and that the cable is good. Make sure that your router or hub is powered on.

[SERVER ERROR]

This appears when the machine cannot connect to your mail server or there is no response from the mail server.

Make sure the SMTP server setting is correct (p. 18). If you have configured “POP before SMTP” settings in the Web pages, make sure these settings are correct.

[SERVER NOT FOUND] / [SMTP] This appears when an incorrect host name is entered for your SMTP server. Check the SMTP server setting (p. 18).

[SERVER NOT FOUND] / [DHCP] This appears when the machine is unable to automatically obtain an IP address. Restart your router or other device that acts as your DHCP server.

[CABLE DISCONNECTED]

This may appear below any of the above messages. Check the same items as in [CONNECTION ERROR] above.

If an undelivered mail report is sent to inform you that your e-mail message was not successfully delivered, the report will be sent to the sender address entered in the e- mail settings (page 17).

22

Image 24

Contents UX-B800SE About the Telephone Consumer Protection ACT Table of Contents Specifications IntroductionScanning Resolution Power requirementsPower consumption Operating temperatureImportant safety information Look at the Operation Panel Number keys Use to dial numbersCOPY/HELP key Letter keys Installation Unpacking ChecklistUnpacking Checklist SetupLoading Paper Loading PaperMaximum number of sheets Legal size 100 sheetsConnecting the Power Cord Connecting the Power CordInstalling the Print Cartridge Print cartridge yield Sharp UX-C80B replacement cartridgeInstalling the Print Cartridge Press NEW if the cartridge you installed is newRemove only the tape from the new cartridge Make sure all Tape is removed Do not touchConnecting the Phone Line Connecting the Phone LineName and Fax Number Press , then untilSetting the Date and Time Setting the Date and TimePress to exit Press to select A.M. or to select P.MSetting the Reception Mode Setting the Reception ModeVolume Adjustment Connecting the Machine Connecting the MachineFax to E-mail RequirementsIf NOW Connecting / Check IP addressChecking your IP address and the connection Press , then to showIf the machine is unable to Communicate Mail Settings Mail SettingsAccessing the machine’s Web Mail settings Setting DescriptionInitial setting Tiff Storing E-mail Addresses Storing E-mail AddressesStoring an e-mail address Or C key, or pressFax to E-mail Transmission Fax to E-mail TransmissionEditing and clearing stored e- mail addresses Display 1=EDIT, 2=CLEARWhen finished, press File Format Press for Tiff Press , pressTo search for a stored address, press Press or until the nameError messages Can show images in the selected formatSending a message only Network Settings Network SettingsInitializing the network settings Sending Faxes Transmittable DocumentsTransmittable Documents Loading the DocumentResolution and Contrast Resolution and ContrastResolution settings Contrast settingsSending a Fax Normal Dialing With Normal Dialing, you pick upDisplay FAX # Mode Sending a Fax Auto DialingSending a Fax Auto Dialing Storing fax and phone numbersEditing and clearing auto-dial numbers Number, or press to exitPress or until Number appears and press Another number, or press to exitUsing an auto-dial number to send a fax Search Dialing Press orSending a fax by Direct Keypad Dialing RedialAutomatic redialing Automatic redialing, pressBatch Page Numbering Batch Page NumberingSending a Fax From Memory Using Auto Mode Using Auto ModeUsing Manual Mode Receiving FaxesTEL/FAX Mode TEL/FAX ModeReception to Memory Putting a call on holdMaking Copies Sorting copiesEnlarge/reduce Press or If Memory Full appearsSpecial Functions BroadcastingBroadcasting Broadcasting using a Group Key If the memory becomes fullStoring destinations in Group Keys Caller ID Requires Service To delete a destination, press when it appearsWhen you have finished entering Destinations, press Until ThenDisplay messages Caller ID listDeleting calls from the list NumberDistinctive Ring Requires Service Blocking voice callsBlocking Unwanted Faxes Blocking Unwanted FaxesDuplex Scanning Receiving Faxes to E-mail Receiving Faxes to E-mailActivating and deactivating Receive Fax to E-mail Printing forwarded faxesPrinting a report Press Press to select on To turn off Receive Fax to E-mailSetting a secure code Secure ReceiveSecure Receive Activating Secure ReceiveDeactivating Secure Receive Clearing the secure codeOption Settings and Print Settings Option SettingsOption Settings Initial setting no StandardInitial setting Error only Initial setting ToneInitial setting 15 seconds Initial setting OFF SettingInitial setting YES Initial setting noPrint Settings Print SettingsInitial setting English Press YES to have the machine verify the presence of aInitial setting Letter Initial setting OFFNot satisfactory after aligning the print cartridge. See Printing Lists Press to print the listTransaction Report Transaction ReportHeadings in the Transaction Report Maintenance Cleaning the MachineCleaning the Machine Cleaning the scanning glass and rollersCleaning the housing Cleaning the print cartridge nozzlesImproving Print Quality Improving Print QualityWiping the print nozzles and contacts Cleaning the cartridge holder About the lithium batteryDirty print cartridge holder may cause Wipe the part indicated below with aTroubleshooting Problems and SolutionsProblems and Solutions Line errorReception and copying problems Receiving machine manually and make sure that it isResponding you should hear a fax tone General problems Printing paper comesAbility Transmission or copyingMessages and Signals Messages and SignalsPersists, see Line error on Print cartridge is installed correctly, and then closePaper jam may have occurred. Follow the procedure Ink remainsAudible signals Server ErrorClearing Paper Jams Clearing Paper JamsClearing a jammed document Clearing jammed printing paperOrdering Parts Ordering PartsPart distribution centers FCC Regulatory Information A R P Material Safety Data Sheet 2/3 Material Safety Data Sheet 3/3 Quick Reference Guide Guía de referencia rápida Cómo enviar un fax por marcación normalIndex IndexIndex Web page in machine Limited Warranty Sharp Corporation Sharp Plaza, Mahwah, New Jersey