Sharp UX-B800SE Initial setting Error only, Initial setting Tone, Initial setting 15 seconds

Option Settings

TRANSACTION	This sets the condition for printing transaction reports (see page
LIST	51). Press a number key as follows:
	(ALWAYS PRINT): Print after every fax transmission,
	reception and error.
	(ERROR/MEMORY): Print only after an error or memory
	operation.
	(SEND ONLY): Print after every fax transmission.
	(ERROR ONLY): Print only when an error occurs.
	(NEVER PRINT): Never print.
	Initial setting: ERROR ONLY
DIAL MODE	This sets the dial mode. Press		(TONE) if you are on a tone
	dial line, or	(PULSE) if you are on a pulse dial line.
	Initial setting: TONE
PSEUDO RING	This sets the duration of the special ringing sound that alerts you
DURATION	to voice calls and manually dialed faxes in TEL/FAX reception
	mode. Press a number key as follows:
	15 seconds
	30 seconds
	60 seconds
	120 seconds
	Initial setting: 15 seconds
DISTINCTIVE	If you subscribe to a distinctive ring service from your phone
RING	company, use this setting to select the ring pattern of the phone
	number that you will use as a fax number. For more information,
	see page 39.
	Initial setting: OFF SETTING

46