Sharp UX-B800SE operation manual FCC Regulatory Information

Page 66

FCC Regulatory Information

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. This equipment connects to the telephone network through a standard USOC RJ-11C network interface jack.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, or for repair or warranty information, please contact Sharp’s Customer Assistance Center. The number is 1-877-794-8675. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This equipment may not be used on coin service provided by the telephone company. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment ID does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

This equipment is hearing-aid compatible.

When programming and/or making test calls to emergency numbers:

♦

♦

Remain on the line and briefly explain to the dispatcher the reason for the call.

Perform such activities in the off-peak hours, such as early morning or late evening.

64

Page 65 Page 67
Image 66
Page 65 Page 67
Contents UX-B800SE About the Telephone Consumer Protection ACT Table of Contents Specifications IntroductionPower consumption Scanning ResolutionPower requirements Operating temperatureImportant safety information Look at the Operation Panel Number keys Use to dial numbersCOPY/HELP key Letter keys Unpacking Checklist InstallationUnpacking Checklist SetupMaximum number of sheets Loading PaperLoading Paper Legal size 100 sheetsInstalling the Print Cartridge Connecting the Power CordConnecting the Power Cord Print cartridge yield Sharp UX-C80B replacement cartridgeRemove only the tape from the new cartridge Installing the Print CartridgePress NEW if the cartridge you installed is new Make sure all Tape is removed Do not touchName and Fax Number Connecting the Phone LineConnecting the Phone Line Press , then untilPress to exit Setting the Date and TimeSetting the Date and Time Press to select A.M. or to select P.MSetting the Reception Mode Setting the Reception ModeVolume Adjustment Fax to E-mail Connecting the MachineConnecting the Machine RequirementsChecking your IP address and the connection If NOW Connecting / CheckIP address Press , then to showIf the machine is unable to Communicate Mail Settings Mail SettingsAccessing the machine’s Web Mail settings Setting DescriptionInitial setting Tiff Storing an e-mail address Storing E-mail AddressesStoring E-mail Addresses Or C key, or pressEditing and clearing stored e- mail addresses Fax to E-mail TransmissionFax to E-mail Transmission Display 1=EDIT, 2=CLEARTo search for a stored address, press When finished, press File Format Press for TiffPress , press Press or until the nameError messages Can show images in the selected formatSending a message only Network Settings Network SettingsInitializing the network settings Transmittable Documents Sending FaxesTransmittable Documents Loading the DocumentResolution settings Resolution and ContrastResolution and Contrast Contrast settingsSending a Fax Normal Dialing With Normal Dialing, you pick upSending a Fax Auto Dialing Display FAX # ModeSending a Fax Auto Dialing Storing fax and phone numbersPress or until Number appears and press Editing and clearing auto-dial numbersNumber, or press to exit Another number, or press to exitUsing an auto-dial number to send a fax Search Dialing Press orAutomatic redialing Sending a fax by Direct Keypad DialingRedial Automatic redialing, pressBatch Page Numbering Batch Page NumberingSending a Fax From Memory Using Manual Mode Using Auto ModeUsing Auto Mode Receiving FaxesReception to Memory TEL/FAX ModeTEL/FAX Mode Putting a call on holdEnlarge/reduce Press or Making CopiesSorting copies If Memory Full appearsSpecial Functions BroadcastingBroadcasting Broadcasting using a Group Key If the memory becomes fullStoring destinations in Group Keys When you have finished entering Destinations, press Caller ID Requires ServiceTo delete a destination, press when it appears Until ThenDeleting calls from the list Display messagesCaller ID list NumberDistinctive Ring Requires Service Blocking voice callsBlocking Unwanted Faxes Blocking Unwanted FaxesDuplex Scanning Receiving Faxes to E-mail Receiving Faxes to E-mailPrinting a report Activating and deactivating Receive Fax to E-mailPrinting forwarded faxes Press Press to select on To turn off Receive Fax to E-mailSecure Receive Setting a secure codeSecure Receive Activating Secure ReceiveDeactivating Secure Receive Clearing the secure codeOption Settings Option Settings and Print SettingsOption Settings Initial setting no StandardInitial setting 15 seconds Initial setting Error onlyInitial setting Tone Initial setting OFF SettingInitial setting YES Initial setting noInitial setting English Print SettingsPrint Settings Press YES to have the machine verify the presence of aInitial setting Letter Initial setting OFFNot satisfactory after aligning the print cartridge. See Printing Lists Press to print the listTransaction Report Transaction ReportHeadings in the Transaction Report Cleaning the Machine MaintenanceCleaning the Machine Cleaning the scanning glass and rollersImproving Print Quality Cleaning the housingCleaning the print cartridge nozzles Improving Print QualityWiping the print nozzles and contacts Dirty print cartridge holder may cause Cleaning the cartridge holderAbout the lithium battery Wipe the part indicated below with aProblems and Solutions TroubleshootingProblems and Solutions Line errorReception and copying problems Receiving machine manually and make sure that it isResponding you should hear a fax tone Ability General problemsPrinting paper comes Transmission or copyingMessages and Signals Messages and SignalsPaper jam may have occurred. Follow the procedure Persists, see Line error onPrint cartridge is installed correctly, and then close Ink remainsAudible signals Server ErrorClearing a jammed document Clearing Paper JamsClearing Paper Jams Clearing jammed printing paperOrdering Parts Ordering PartsPart distribution centers FCC Regulatory Information A R P Material Safety Data Sheet 2/3 Material Safety Data Sheet 3/3 Quick Reference Guide Guía de referencia rápida Cómo enviar un fax por marcación normalIndex IndexIndex Web page in machine Limited Warranty Sharp Corporation Sharp Plaza, Mahwah, New Jersey
Top Page Image Contents