Sharp UX-B800SE Caller ID Requires Service, To delete a destination, press when it appears

Page 39

programmed. Clear one of the keys and then store a group.

4Press the Group Key that you want

33/G1 34/G2

to use ( or ). (If you are

clearing a Group Key, press the Group key that you want to clear and go to Step 8.)

If [ALREADY STORED] or [RAPID # STORED] appears, the key has already been programmed. Clear the key or try the other Group Key.

5Select a destination using one of the following methods:

Press a Rapid Key.

Press SPEED DIAL and enter a 2-digit Speed Dial number.

Press or until the desired destination appears in the display.

Press , , or

(only for an e-mail destination).

6Press to enter the destination.

7Repeat Steps 5 and 6 for each of the other desired destinations (maximum of 20).

You can press to scroll through and check your entered destinations.

To delete a destination, press when it appears.

Caller ID (Requires Service)

8When you have finished entering

the destinations, press .

STOP

9 Press to exit.

Caller ID (Requires Service)

Important: To use this function, you must subscribe to a Caller ID service from your phone company. The machine may not be compatible with some Caller ID services.

If you subscribe to a Caller ID service, you can have the machine show the name and number of the caller when you receive a call.

1

Press

FUNCTION

until

 

, then

 

 

[OPTION SETTING] appears.

 

2

Press

, then

until

 

 

[CALLER-ID] appears.

Special6.

Functions

3

Press

 

(YES) to turn on Caller

 

ID. (To turn off Caller ID, press and go to Step 7.)

4 If the area code must not be included when you dial a local phone number (within your area

code), press to select SET and enter your area code in Step 5. (This will remove the area code from local numbers stored in the Caller ID list, allowing you to automatically dial those numbers from the list (see

37

Image 39
Contents UX-B800SE About the Telephone Consumer Protection ACT Table of Contents Introduction SpecificationsOperating temperature Scanning ResolutionPower requirements Power consumptionImportant safety information Look at the Operation Panel Number keys Use to dial numbersCOPY/HELP key Letter keys Setup InstallationUnpacking Checklist Unpacking ChecklistLegal size 100 sheets Loading PaperLoading Paper Maximum number of sheetsPrint cartridge yield Sharp UX-C80B replacement cartridge Connecting the Power CordConnecting the Power Cord Installing the Print CartridgeMake sure all Tape is removed Do not touch Installing the Print CartridgePress NEW if the cartridge you installed is new Remove only the tape from the new cartridgePress , then until Connecting the Phone LineConnecting the Phone Line Name and Fax NumberPress to select A.M. or to select P.M Setting the Date and TimeSetting the Date and Time Press to exitSetting the Reception Mode Setting the Reception ModeVolume Adjustment Requirements Connecting the MachineConnecting the Machine Fax to E-mailPress , then to show If NOW Connecting / CheckIP address Checking your IP address and the connectionIf the machine is unable to Communicate Mail Settings Mail SettingsAccessing the machine’s Web Mail settings Setting DescriptionInitial setting Tiff Or C key, or press Storing E-mail AddressesStoring E-mail Addresses Storing an e-mail addressDisplay 1=EDIT, 2=CLEAR Fax to E-mail TransmissionFax to E-mail Transmission Editing and clearing stored e- mail addressesPress or until the name When finished, press File Format Press for TiffPress , press To search for a stored address, pressError messages Can show images in the selected formatSending a message only Network Settings Network SettingsInitializing the network settings Loading the Document Sending FaxesTransmittable Documents Transmittable DocumentsContrast settings Resolution and ContrastResolution and Contrast Resolution settingsWith Normal Dialing, you pick up Sending a Fax Normal DialingStoring fax and phone numbers Display FAX # ModeSending a Fax Auto Dialing Sending a Fax Auto DialingAnother number, or press to exit Editing and clearing auto-dial numbersNumber, or press to exit Press or until Number appears and pressSearch Dialing Press or Using an auto-dial number to send a faxAutomatic redialing, press Sending a fax by Direct Keypad DialingRedial Automatic redialingBatch Page Numbering Batch Page NumberingSending a Fax From Memory Receiving Faxes Using Auto ModeUsing Auto Mode Using Manual ModePutting a call on hold TEL/FAX ModeTEL/FAX Mode Reception to MemoryIf Memory Full appears Making CopiesSorting copies Enlarge/reduce Press orSpecial Functions BroadcastingBroadcasting Broadcasting using a Group Key If the memory becomes fullStoring destinations in Group Keys Until Then Caller ID Requires ServiceTo delete a destination, press when it appears When you have finished entering Destinations, pressNumber Display messagesCaller ID list Deleting calls from the listBlocking voice calls Distinctive Ring Requires ServiceBlocking Unwanted Faxes Blocking Unwanted FaxesDuplex Scanning Receiving Faxes to E-mail Receiving Faxes to E-mailPress Press to select on To turn off Receive Fax to E-mail Activating and deactivating Receive Fax to E-mailPrinting forwarded faxes Printing a reportActivating Secure Receive Setting a secure codeSecure Receive Secure ReceiveClearing the secure code Deactivating Secure ReceiveInitial setting no Standard Option Settings and Print SettingsOption Settings Option SettingsInitial setting OFF Setting Initial setting Error onlyInitial setting Tone Initial setting 15 secondsInitial setting no Initial setting YESPress YES to have the machine verify the presence of a Print SettingsPrint Settings Initial setting EnglishInitial setting Letter Initial setting OFFNot satisfactory after aligning the print cartridge. See Press to print the list Printing ListsTransaction Report Transaction ReportHeadings in the Transaction Report Cleaning the scanning glass and rollers MaintenanceCleaning the Machine Cleaning the MachineImproving Print Quality Cleaning the housingCleaning the print cartridge nozzles Improving Print QualityWiping the print nozzles and contacts Wipe the part indicated below with a Cleaning the cartridge holderAbout the lithium battery Dirty print cartridge holder may causeLine error TroubleshootingProblems and Solutions Problems and SolutionsReception and copying problems Receiving machine manually and make sure that it isResponding you should hear a fax tone Transmission or copying General problemsPrinting paper comes AbilityMessages and Signals Messages and SignalsInk remains Persists, see Line error onPrint cartridge is installed correctly, and then close Paper jam may have occurred. Follow the procedureServer Error Audible signalsClearing jammed printing paper Clearing Paper JamsClearing Paper Jams Clearing a jammed documentOrdering Parts Ordering PartsPart distribution centers FCC Regulatory Information A R P Material Safety Data Sheet 2/3 Material Safety Data Sheet 3/3 Quick Reference Guide Cómo enviar un fax por marcación normal Guía de referencia rápidaIndex IndexIndex Web page in machine Limited Warranty Sharp Plaza, Mahwah, New Jersey Sharp Corporation