Runco DTV-947 manual Left-Right east-west Adjustments, Left Right E-W

Random Access Adjustment Mode

Left-Right (east-west) Adjustments

Left-right and center adjustments affect only the vertical lines of the projected image.

To start up the left-right and center adjustments, follow the next procedure :

Push the control disc up or down to highlight LEFT-RIGHT (E/W) on the geometry menu and then press ENTER.

ENTER will select Left - Right adjustment menu

EXIT returns to random access adjustment mode main menu. ADJUST returns to Operational mode

GEOMETRY

HPHASE RASTER SHIFT

LEFT - RIGHT (E-W)

TOP - BOTTOM (N-S)

SIZE

LEFT - RIGHT (E-W)

V CENTERLINE BOW

V CENTERLINE SKEW

RIGHT BOW

RIGHT KEYSTONE

LEFT BOW

LEFT KEYSTONE

Select with or then <ENTER> <EXIT> to return.

Only the green image is displayed while making left-right adjustments. The red and blue images will automatically be corrected in the same manner. Convergence corrections are automati- cally disabled for the duration of these adjust- ments.

The following adjustments can be executed

-vertical centerline bow

-vertical centerline skew

-side keystone (left - right)

-side bow (left - right)

All adjustments are indicated on the screen with the function name, a bar scale and a number between 0 and 100.

Adjust the next alignments until the vertical lines are straight.

To enter an alignment, push the control disc up or down to highlight a function and press ENTER to activate this function.

Press EXIT to return.

LEFT - RIGHT (E-W)

V CENTERLINE BOW V CENTERLINE SKEW RIGHT BOW

RIGHT KEYSTONE

LEFT BOW

LEFT KEYSTONE

Select with or then <ENTER> <EXIT> to return.

Corrects for curvature of the vertical lines in the middle of the image.

Corrects the tilting of the vertical lines in the middle of the image.

Corrects for curvature of the vertical lines on the right side.

Corrects the keystone geometry correction of the vert. lines on the right side.

Corrects for curvature of the vertical lines on the left side.

Corrects the keystone geometry correction of the vert. lines on the left side.

Correct by pushing	Correct by pushing
the control disc to the	the control disc to
right.	the left.

6-7