Runco DTV-947 manual Service Mode, Starting up the Service mode, Overview flowchart ‘Service’ mode

SERVICE MODE

Starting up the Service mode.

Use the control stick to highlight ‘Service’ and then press ENTER.

Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All other password pro- tected items are now also available if you stay in the adjustment mode.

ENTER continues to the Service Mode main menu.

EXIT returns to the Operational mode.

The service items are combined in two service menus. To switch from the first to the second menu or vice versa, push the control stick forward or backward to select ‘more...’

Overview flowchart ‘Service’ mode.

Overview flowchart ‘Service’ mode

ADJUSTMENT MODE

Select a path from below :

GUIDED

RANDOM ACCESS

INSTALLATION

SERVICE MODE

PROJECTOR SET-UP

MEMORY MANAGEMENT

COMMON SETTINGS

12C DIAGNOSTICS

Select with or then <ENTER> <EXIT> to return.

PROJECTOR SETUP

IDENTIFICATION

TOTAL RUN TIME

CHANGE PASSWORD

CHANGE LANGUAGE

CHANGE PROJECTOR ADDRESS

CHANGE BAUDRATE

POWER UP MODE

SERVICE MODE

MEMORY MANAGEMENT

COPY A BLOCK

COMMON SETTINGS

12C DIAGNOSTICS

DELETE A BLOCK

DELETE ALL BLOCKS

ALLSETTINGS MIDPOS

R & B CONVERGENCE

GREEN CONVERGENCE MID

G2 ADJUSTMENT

CRT RUN IN CYCLE

PROJECTOR WARM UP

MEMORY BANKS

7-1