Omron CPM1A operation manual Host Link Communications, Expansion Units

Page 26

System Configuration		Section 1-2
Expansion Units
Analog I/O Unit	Temperature Sensor Unit	CompoBus/S I/O Link Unit

	Unit		Max. number		Inputs	Outputs	Model
				of Units

Analog I/O Unit			3	Units max.	2 analog inputs	1 analog output	CPM1A-MAD01
2 analog inputs (2 words)
1 analog output (1 word)
Temperature		Thermocouple	3	Units max.	2 inputs (K, J)	---	CPM1A-TS001
Sensor Unit		inputs
			1	Unit max.	4 inputs (K, J)		CPM1A-TS002
			(See note.)

		Platinum	3	Units max.	2 inputs (Pt100, JPt100)		CPM1A-TS101
		resistance
		thermometer
		thermometer	1	Unit max.	4 inputs (Pt100, JPt100)		CPM1A-TS102
		inputs	1	Unit max.	4 inputs (Pt100, JPt100)		CPM1A-TS102
		inputs	(See note.)
			(See note.)
CompoBus/S I/O Link Unit			3	Units max.	8 bits	8 bits	CPM1A-SRT21
8 inputs and 8 outputs					(Inputs from the Master.)	(Outputs to the Master.)

Note Only one CPM1A-TS002/TS102 Temperature Sensor Unit can be connected to the CPU Unit. If a CPM1A-TS002/102 is connected to the CPU Unit, only one additional Expansion Unit (other than a CPM1A-TS002/102) or one Expansion I/O Unit can be connected to the CPU Unit.

1-2-3 Host Link Communications

Host Link communications which allows up to 32 OMRON PCs to be controlled from a host computer. The computer-PC connections can be made connectors such as RS-232C and RS-422 Adapters.

One-to-one Communications The following diagram shows the possible methods for a 1:1 connection between a CPM1A and an IBM PC/AT or compatible computer.

RS-232C Adapter

IBM PC/AT or
compatible	RS-232C Cable
	RS-232C Cable

CPM1A CPU Unit

CQM1-CIF02

12

Image 26

Contents CPM1A CPM1A Programmable Controllers Omron Product References  OmronTable of Contents Appendices About this Manual Precautions Intended Audience General PrecautionsSafety Precautions Operating Environment Precautions Application PrecautionsXiv Application Precautions Backup method Data Concepts EC DirectivesApplicable Directives Conformance to EC DirectivesXviii Section Section CPM1A Features and Functions1 CPM1A Features Standard Peripheral Devices Using the PTNT Link Communications CompoBus/S I/O Link Units Programming is PossibleExpansion I/O Units 2 I/O Terminal and IR Bit AllocationCPU Units Unit Relay output Transistor output Sink type Source typeSet value Word Word 001 or later Control Corresponding IR word Setting range BCD3 CPM1A Functions PC model Input bits Response time Mode Function PC model Input bits Min. input pulse widthPulse output single-phase output Temperature Sensor Unit Functions CompoBus/S Slave Functions CPM1A-SRT21CPU Unit and Expansion Unit System ConfigurationCPU Unit and Expansion I/O Unit Configuration CPM1A CPU UnitsExpansion I/O Units Unit Max. number Inputs Outputs Model UnitsHost Link Communications Expansion UnitsConnecting to a Programmable TerminalName Usage Model number One-to-one PC Link CommunicationsAdapters and Cables CompoBus/S I/O Link Connections Name SpecificationsOne-to-one NT Link Communications Peripheral Device ConnectionsSysmac Support Software SYSMAC-CPT Support Name Model numberRevised Specifications Previous specifications New specifications Relevant pagesUnit Specifications and Components CPM1A-10CDR-j CPM1A-20CDR-j CPM1A-30CDR-j CPM1A-40CDR-j SpecificationsGeneral Specifications Characteristics Memory Backup Increment Mode 5 kHz Max 3 I/O SpecificationsCPU Unit Input Specifications SpecificationExpansion I/O Unit Input Specifications CPU Unit and Expansion I/O Unit Output Specifications Relay Output20EDT 8ET Transistor Output Sink TypeTransistor Output Source Type 10CDT1-D 20CDT1-D 30CDT1-D 40CDT1-D 20EDT1 8ET1RS-422 Adapter Specifications Communications Adapter SpecificationsRS-232C Adapter Specifications CPM1A-10CDR-j/10CDT-D/10CDT1-D 10 I/O Terminals Unit ComponentsCPU Unit Components CPM1A-40CDR-j/40CDT-D/40CDT1-D 40 I/O TerminalsCPU Unit Component Descriptions Indicator Status MeaningFatal error Input indicators Expansion I/O Unit with 8 Input Terminals Expansion I/O Unit ComponentsExpansion I/O Unit with 20 I/O Terminals Expansion I/O Unit with 8 Output TerminalsTemperature Sensor Unit Components Analog I/O Unit ComponentsSet value Thermocouple Range C Range F CPM1A-TS001/002CPM1A-TS101/102 Set value Platinum resistance Range C Range FPins Function CompoBus/S I/O Link Unit ComponentsRS-422 Adapter Communications Adapter ComponentsRS-232C Adapter Installation and Wiring Power Supply Voltage Design PrecautionsPower Supply Wiring 4 CPM1A Power InterruptionsMomentary Power Failure Detection Selecting an Installation SiteInstallation Site Conditions Automatic RestartPanel/Cabinet Installation Overheating1 CPM1A Orientation Installing the CPM1A2 CPM1A Installation CorrectDIN Track Installation Removal Connecting an Expansion I/O UnitInstallation Section Line Noise Wiring and ConnectionsGeneral Precautions for Wiring Hanging DuctsConduits Ground WiringFloor Ducts GroundingCrimp Connectors To 240-VAC Power SupplyVDC Power Supply Input Wiring Input ConfigurationCPM1A-8ED Input Wiring Example OutputsDevice Circuit diagram Input DevicesInductive Loads Output Wiring Relay Output WiringOutput Configurations CPM1A-8ER Transistor Output Wiring Sink Type CPM1A-8ET Transistor Output Wiring Source Type CPM1A-40CDT1-DPolarity of Power Supply for the Load Output Short ProtectionInrush Current Considerations Fuse InsertionOne-to-one Host Link Connection Peripheral Device ConnectionHost Link Connections One-to-N Host Link Connection RDB SDB RDA SDA One-to-one PC Link Connections One-to-one NT Link Connections C200HX/HG/HE PC Using Peripheral Devices Support Software Capabilities SSS System Setup2 CPM1A Restrictions and Precautions Offline Operations Online EditingFill Group Name Description Go ToCopy PrintGroup Name Description Utility Data Area Lists File Time ChartPC Setup ChangeOnline Operations Offline and Online Operations CQM1-PRO01-E Using a Programming ConsoleCompatible Programming Consoles C200H-PRO27-EDifferent Keys Mode SwitchBuzzer Volume Contrast ControlMonitor Mode Changing the CPM1A’s Mode with the Mode SwitchProgram Mode RUN ModeConnecting the Programming Console Panel InstallationEntering the Password Preparation for OperationProgram Password Program BZ Programming Console Operations OverviewPartial Clear Clearing MemoryAll Clear Key Sequence Reading/Clearing Error MessagesBuzzer Operation OFF Entering or Editing Programs Writing Hexadecimal, BCD Constant Writing a Word AddressWriting a Word Address DM Writing an Unsigned Decimal Number#FFF6 Instruction Search Bit Operand Search00207INSERT END Not Inserting and Deleting InstructionsInsertion Deletion00178CIRCUIT ERR Checking the ProgramDelete END Corrected ProgramCont 11 Bit, Digit, Word MonitorBit Monitor Word MonitorCLR Channel LR Multiple Address MonitoringChannel LR @OFF OFF OFF Differentiation MonitorBinary Monitor CLR OFF OFF OFFThree-word Monitor Signed Decimal Monitor Unsigned Decimal Monitor3CH CHG? Changing Timer, Counter SVThree-word Data Modification Incrementing and Decrementing a Constant Hexadecimal, BCD Data ModificationInputting a New SV Constant Montr Binary Data ModificationPres VAL? Signed Decimal Data Modification D0000 MontrForce Set, Reset Unsigned Decimal Data ModificationOn on Clear Force Set/ResetHex-ASCII Display Change 00000FORCE RELE?Displaying the Cycle Time Program PasswordProgramming Example Preparatory Operations00000MEMORY CLR? HR CNT DM Montr END HR CNT DM Programming Procedures Example ProgramInputting the Self-holding Bit Programming ProceduresInputting the One-second Timer Write NOPInputting the Two-second Timer Inputting the 10-count CounterInputting the END001 Instruction LD notInputting the Flicker Output Test Run in Monitor Mode Monitor BZTest Runs and Error Processing Initial System Checks Initial System Checks and Test Run Procedure2 CPM1A Test Run Procedure Points to checkFlash Memory Precautions Error CPM1A CycleSelf-diagnosis Functions Non-fatal ErrorsFatal Errors Message FAL No Meaning and appropriate responseError Messages Identifying ErrorsUser-defined Errors Error FlagsFALS07 Programming Console Operation ErrorsProgramming Errors Message MSG46Type Message Meaning and appropriate response Circuit ERRTroubleshooting Flowcharts Main CheckPower Supply Check Fatal Error Check Follow the Memory ErrorNon-fatal Error Check 121 122 Environmental Conditions Check Memory Error Check Inspection Items Maintenance InspectionsPower supply Allowable voltage fluctuation range Inspection items Details Criteria RemarksStandard Tools Handling PrecautionsNecessary Tools for Inspection Measurement DevicesExpansion Memory Unit Memory Areas PrecautionsOverview ButtonNomenclature Specifications and NomenclatureSpecifications Mounting/Removing Eeprom LED IndicatorHandling Mounting EepromCPM1, CPM1A, CPM2A Peripheral Port Communications SettingsPC Connections CQM1, and SRM1 PCsDisconnecting Uploading ProgramsOperation Procedure Downloading Programs134 135 CPU Units Standard ModelsExpansion Units Expansion I/O UnitsCompoBus/S I/O Link Unit Temperature Sensor UnitsDescription Specifications Model number Communications AdaptersName Appearance Model Number Specifications Peripheral DevicesCPM1A-20CDR-j/20CDT-D/20CDT1-D CPU Unit DimensionsCPM1A-10CDR-j/10CDT-D/10CDT1-D CPU Unit CPM1A-30CDR-j/30CDT-D/30CDT1-D CPU UnitCPM1A-8jjjExpansion I/O Unit CPM1A-40CDR-j/40CDT-D/40CDT1-D CPU UnitCPM1A-20EDjExpansion I/O Unit CPM1A-SRT21 CompoBus/S I/O Link Unit CPM1A-TSjjjTemperature Sensor UnitCPM1A-MAD01 Analog I/O Unit CPM1-CIF01 RS-232C Adapter CPM1-CIF11 RS-422 AdapterDimensions with Peripheral Devices Attached Appendix BAUTOEXEC.BAT ACPAscii BCDBit-control instruction Bit designatorBit number BlockCONFIG.SYS CTSData link DefaultDIP switch Data link areaEeprom EpromFCS Input signal DelayInitialization error InstallJIS LEDLSS Not OFFPCB RAS PromRAM ROM SCPSSS System error Syntax errorSystem configuration System error messageWDT Numbers Index 165 166 167 Revision code Date Revised content Revision History

Related manuals

Manual 6 pages 62.26 Kb