Omron General Specifications, CPM1A-10CDR-j CPM1A-20CDR-j CPM1A-30CDR-j CPM1A-40CDR-j

SpecificationsSection 2-1

2-1	Specifications
2-1-1	General Specifications
	Item		CPM1A-10CDR-j		CPM1A-20CDR-j		CPM1A-30CDR-j	CPM1A-40CDR-j
			CPM1A-10CDT-D		CPM1A-20CDT-D		CPM1A-30CDT-D	CPM1A-40CDT-D
			CPM1A-10CDT1-D		CPM1A-20CDT1-D		CPM1A-30CDT1-D	CPM1A-40CDT1-D
Supply voltage		AC type	100 to 240 VAC, 50/60 Hz
		DC type	24 VDC
Operating		AC type	85 to 264 VAC
voltage range
		DC type	20.4 to 26.4 VDC
Power		AC type	30 VA max.				60 VA max.
consumption
		DC type	6 W max.				20 W max.
Inrush current			30 A max.				38 A max.
External power		Supply voltage	24 VDC
supply
(AC type only)		Output capacity	200 mA				300 mA
(see note)
Insulation resistance			20 MΩ min. (at 500 VDC) between the external AC terminals and protective earth
			terminals
Dielectric strength			2,300 VAC 50/60 Hz for 1 min between the external AC and protective earth
			terminals, leakage current: 10 mA max.
Noise immunity			Conforms to IEC6100-4-4; 2 kV (power lines)
Vibration resistance			10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z
			directions for 80 minutes each
			(Time coefficient; 8 minutes ⋅			coefficient factor 10 = total time 80 minutes)
Shock resistance			147 m/s2 three times each in X, Y, and Z directions
Ambient temperature			Operating: 0° to 55° C
			Storage: –20°	to 75° C
Humidity			10% to 90% (with no condensation)
Atmosphere			Must be free from corrosive gas
Terminal screw size			M3
Grounding			Less than 100 W
Power interrupt time			AC type: 10 ms min.
			DC type: 2 ms min.
			(A power interruption occurs if power falls below 85% of the rated voltage for longer
			than the power interrupt time.)
CPU Unit		AC type	400 g max.		500 g max.		600 g max.	700 g max.
weight
		DC type	300 g max.		400 g max.		500 g max.	600 g max.
Expansion I/O Unit weight			Units with 20 I/O points:			300 g max.
			Units with 8 output points:			250 g max.
			Units with 8 input points:			200 g max.
Expansion Unit weight			Analog I/O Unit:			150 g max.
			Temperature Sensor Units: 250 g max.
			CompoBus/S I/O Link Unit:200 g max.

Note Use the external power supply as the service power supply of input devices. The power supply cannot be used for driving output devices.

20