Omron CPM1A operation manual Transistor Output Sink Type, Transistor Output Source Type, 20EDT 8ET

Specifications							Section 2-1
Transistor Output (Sink Type)
Item				Specification
	CPM1A-10CDT-D			CPM1A-20CDT-D	CPM1A-30CDT-D		CPM1A-40CDT-D
				/-20EDT
				/-8ET
Max. switching capacity	24 VDC +10%/	–15%	, 0.3 A/point (see note)
	0.9 A/Unit			0.9 A/common	0.9 A/common	0.9 A/common
				1.8 A/Unit	2.7 A/Unit	3.6 A/Unit
Leakage current	0.1 mA max.
Residual voltage	1.5 V max.
ON delay	0.1 ms max.
OFF delay	OUT01000/01001:			0.2 ms max. (load current: 100 to 300 mA)
				0.5 ms max. (load current: 5 to 100 mA)
	Other than OUT01000/01001: 1 ms max. (load current: 5 to 300 mA)
Fuse	1.25 A/common (cannot be replaced by the user)
Circuit configuration				Output LED			OUT

Internal Circuits

OUT 24 VDC

COM (–)

Note When using the OUT01000 or OUT01001 as a pulse output, connect dummy resistors as required to set the load current to 0.1 to 0.2 A. If the load current is below 0.1 A, the ON-to-OFF response time will become longer and high-speed pulse will not be output. On the other hand, if the load current is above 0.2 A, the transistor may generate heat and components may be damaged.

Transistor Output (Source Type)

Item

Specification

CPM1A-

CPM1A-

CPM1A-

CPM1A-

10CDT1-D

20CDT1-D

30CDT1-D

40CDT1-D

/-20EDT1

/-8ET1

Max. switching capacity

24 VDC +10%/

–15%

, 0.3 A/point (see note)

0.9 A/Unit

0.9 A/common

0.9 A/common

0.9 A/common

1.8 A/Unit

2.7 A/Unit

3.6 A/Unit

Leakage current

0.1 mA max.

Residual voltage

1.5 V max.

ON delay

0.1 ms max.

OFF delay

OUT01000/01001:

0.2 ms max. (load current: 100 to 300 mA)

0.5 ms max. (load current: 5 to 100 mA)

Other than OUT01000/01001: 1 ms max. (load current: 5 to 300 mA)

Fuse

1.25 A/common (cannot be replaced by the user)

Circuit configuration

Output LED

COM (+)

Internal

OUT

24 VDC

Circuits

OUT

26