Omron CPM1A Group Name Description Go To, Copy, Fill, Print, Hex Ascii, Save DM Data

Support Software Capabilities		Section 4-1
Group	Name	Description
DM	Go To Page	Displays the contents of the data memory in the system work area in pages
(data memory)		(units of 160 words). The data can be altered with this function. (C-series PCs
		only)
	Copy	Copies the contents of the DM area of the system work area (data memory
		information).
	Fill	Writes the same data to more than one data word in the system work area data
		memory area.
	Print	Prints a specified range of DM words.
	Hex <—> ASCII	Specifies the display mode for the data memory contents when the work disk
		data memory contents are to be altered. The display mode can be hexadecimal
		or ASCII.
	Save DM Data	Writes the contents of a specified range of system work area data memory to
		the data disk.
	Retrieve DM Data	Retrieves the saved data disk data memory to the system work area DM area.
I/O Table	Write I/O Table	Edits the I/O table in the system work area.
	Check I/O Table	Checks the contents of the I/O table in the system work area.
	Save I/O Table	Writes the I/O table in the system work area to a data disk.
	Retrieve I/O Table	Retrieves the I/O table data stored on a data disk to the system work area.
	Print I/O Table	Prints an I/O table list. (C-series PCs only)

70