Collecting and Sending Messages
Forwarding a Message
You can select to forward a message to another mailbox or to several mailboxes. Only messages marked as Private by the sender cannot be forwarded.
To forward the message to other mailboxes:
1.When listening to the message, press 1.
2.Select the type of forward you want:
•Forward the message with a comment at the start: Press 2.
•Forward the message with a comment at the end: Press 3.
3.The system will prompt you to record your comment after the tone. Record your comment and press # to finish recording.
4.The system will prompt you for the forwarding addresses.
•Whilst entering addresses, you can press *2 to switch between entering an address by extension number or by matching a user name.
•Enter a mailbox number (or dial the required name) and then press #.
•Repeat until you have enter all the mailboxes to which you want to forward the message.
•To select and add a mailing list, press *5. You will be asked to enter the mailbox number of the mailing list's owner and then the number of the list. For more details see Mailing Lists.
•To delete the last number entered, press *3.
•Press # again to finish addressing.
5.Select any of the following options:
•To mark the forwarded message as private: Press 1.
•To mark the forwarded message as priority: Press 2.
•To send the forwarded message: Press #.
You can select to set the address for a forwarded message before recording the comment. See Address Before Record.
Intuity Emulation Mode Mailbox Users Guide | Page 13 |
IP Office 3.0 | 40DHB0002USCW Issue 8d (2nd March 2005) |