AT&T Remote Port Security Device user manual Xxxxxx PBX

Page 102

Cables, Connectors, and Ports Table

Table A-1 shows the cables, connectors, and ports for installing the RPSD system. This table includes optional connections as well as the basic configuration.

TABLE A-1

Cables, Connectors, and Ports

	Part		COMCODE	From	To
	Part		COMCODE	From	To
	modular connector		XXXXXX	PBX	RJ11 at modem
	6 position wire		XXXXXX	RJ11 at PBX	RJ11 at modem
	modular connector1		XXXXXX	Cable from PBX	modem
	7 ft. cable with modular		Supplied with	RPSD Lock	CO line or modem
	connector on each end		RPSD Lock
			RPSD Lock
	14 ft. cable with modular		Supplied with	RPSD Lock	CO line or modem
	connector on each end		RPSD Lock
	RJ11 wall jack2		XXXXXX	RJ11 to RPSD	CO line
	EIA-RS-232 cable3		XXXXXX	DB25 at RPSD	DB25 at admin.
				Lock	terminal or printer
					or A/B switch
	DB25 connector3		XXXXXX	RPSD Lock	Cable to admin.
					terminal or printer
					or A/B switch

	DB25 connector3		XXXXXX	Admin. terminal or	Cable to RPSD
				printer or A/B	Lock
				switch

1The 212A modem uses a DB25 connection. See Figures 2-7and 2-8for the details on making up the appropriate connector.

2If RJ11 receptacle is not present on CO line, install one.

3The RPSD Lock maybe connected to the administration terminal, printer, or A/B switch (to allow connection to both the terminal and printer).

Cables, Connectors, and Ports Table

A-1

Image 102

Contents AT&T Trademark Notice Important Safety Instructions Important Safety Instructions FCC Notices Part 15, Subpart aPart Contents Rpsd System Administration Rpsd Key Use TroubleshootingCables, Connectors, and Ports Table Device LEDsList of Figures List of Tables Getting Started Getting Started Protection Process Rpsd Lock and Key Configuration Audience ResponsibilitiesThis Document Typographical ConventionsHotline or Other Service Call Numbers/Addresses 800Installation Installation 2Installation Power Supply Room Layout/EnvironmentLocation of Administration Terminal or Printer Hardware Components Rpsd LockRpsd Power Monitor Adapter Bypass Connections PBXs Other Rpsd Lock or Key Administration TerminalRpsd Lock Administration Printer ModemsRpsd Key Hardware Installation Procedures Installing the Rpsd LockCommon Rpsd Lock Configuration Connecting the Rpsd Lock to the CO Line Connecting the Rpsd Lock to the PBX Modem Rpsd Lock to Modem Rpsd Rpsd Lock to Administratlon Terminal or Printer DTE Powering Up the Rpsd Lock Installing the Rpsd Key Connecting the Rpsd Key to the Terminal Connecting the Rpsd Key to the ModemPowering Up the Rpsd Key Testing an Uninitialized Key Power-Up Behavior of Uninitialized KeyCables, Connectors, and Ports Table PBX24Installation Aux. Port Settings Software ComponentsInitializing the Rpsd Lock Initializing an Rpsd Key Test Rpsd Lock Installation Rpsd System Administration Time of Day Access System Activity Log Fields of the System Activity Log entries are Single Point Administration Enable/Disable Block AT&T and Other Key UsersForce Connect/Disconnect Authorized Keys 6RPSD System Administration Rpsd System Administrator Command Set Add UserSyntax Sample Command and Response Without Optional Secret Key Sample Command and Response With Optional Secret KeySample Command and Response Block UserUnblock User Test User Remove UserFirst Sample Command and Response List User TableBlocked? Second Sample Command and ResponseUser ID Permanent?Third Sample Command and Response CR Change Restriction RestridStarthhmm Endhhmm Dayno Restriction ID LR List RestrictionsN t a Start TimeUR User Restrictions LH Log History Fields of the Log History screen are AH Access History Device #Duration FH Failure History Date Time User ID Device #Reason ST Status Display LS List Statistics RS Reset Statistics FC Force ConnectFD Force Disconnect Date SetClock Set ID SetSC Set Communications Parameters Help Screens Sample Help Request and Help ResponseRpsd Key Use Rpsd Key Use Access Failure Messages Last Call Status TestRpsd Key User Command Set Set User ID Set Secret KeySet Device Number List User InformationHistory Display 08/14/90 08/14/90 131413 Date Changed OK Set Log ID Status Display RPSD/KEY1110RPSD Key Use Wipe Out Troubleshooting Troubleshooting 2Troubleshooting Access Failure Messages Check described in Testing the Rpsd Lock Access Failure Messages Code Meaning Action 6Troubleshooting Testing the Rpsd Lock Built-in DiagnosticsSelf Check Last Call Status TestHardware Replacement Modem Ring TestReplacing the PBX Modem Replacing the Lock or Key 12Troubleshooting Saving the Key Seed Value Cables, Connectors, and Ports Table Xxxxxx PBX Device LEDs Front Panel LEDs Figure B-1AT&T Definity Rpsd Table B-2 Index Index2Index Index