AT&T Remote Port Security Device user manual Cables, Connectors, and Ports Table, Pbx

Page 41

Cables, Connectors, and Ports Table

Table 2-2 shows the cables, connectors, and ports required to install the RPSD system. This table includes optional connections as well as the basic configuration.

TABLE 2-2

Cables, Connectors, and Ports

	Part	From	To

modular connector		PBX	RJ11 at modem
6 position wire		RJ11 at PBX	RJ11 at modem
modular connector1		Cable from PBX	modem
7 ft. cable with modular		RPSD Lock	CO line or modem
connector on each end
14 ft. cable with modular		RPSD Lock	CO line or modem
connector on each end
RJ11 wall jack2		RJ11 to RPSD	CO line
EIA-RS-232 cable3		DB25 at RPSD Lock	DB25 at admin.
			terminal or printer or
			A/B switch
DB25	connector3	RPSD Lock	Cable to admin.
			terminal or printer or
			A/B switch
DB25	connector3	Admin. terminal or	Cable to RPSD Lock
		printer or A/B switch

1The 212A modem uses a DB25 connection. See Figures 2-8and 2-9for the details on making up the appropriate connector.

2If RJ11 receptacle is not present on CO line, install one.

3The RPSD Lock may be connected to the administration terminal, printer, or A/B switch (to allow connection to both the terminal and printer).

Hardware Installation Procedures

2-23

Image 41

Contents AT&T Trademark Notice Important Safety Instructions Important Safety Instructions Part FCC NoticesPart 15, Subpart a Contents Rpsd System Administration Cables, Connectors, and Ports Table TroubleshootingRpsd Key Use Device LEDsList of Figures List of Tables Getting Started Getting Started Protection Process Rpsd Lock and Key Configuration Responsibilities AudienceTypographical Conventions This Document800 Hotline or Other Service Call Numbers/AddressesInstallation Installation 2Installation Room Layout/Environment Power SupplyLocation of Administration Terminal or Printer Rpsd Lock Hardware ComponentsRpsd Power Monitor Adapter Bypass Connections PBXs Rpsd Lock Administration Printer Rpsd Lock or Key Administration TerminalOther ModemsRpsd Key Installing the Rpsd Lock Hardware Installation ProceduresCommon Rpsd Lock Configuration Connecting the Rpsd Lock to the CO Line Connecting the Rpsd Lock to the PBX Modem Rpsd Lock to Modem Rpsd Rpsd Lock to Administratlon Terminal or Printer DTE Powering Up the Rpsd Lock Installing the Rpsd Key Powering Up the Rpsd Key Connecting the Rpsd Key to the TerminalConnecting the Rpsd Key to the Modem Power-Up Behavior of Uninitialized Key Testing an Uninitialized KeyPBX Cables, Connectors, and Ports Table24Installation Initializing the Rpsd Lock Aux. Port SettingsSoftware Components Initializing an Rpsd Key Test Rpsd Lock Installation Rpsd System Administration Time of Day Access System Activity Log Fields of the System Activity Log entries are Force Connect/Disconnect Single Point AdministrationEnable/Disable Block AT&T and Other Key Users Authorized Keys 6RPSD System Administration Syntax Rpsd System Administrator Command SetAdd User Sample Command and Response With Optional Secret Key Sample Command and Response Without Optional Secret KeyUnblock User Sample Command and ResponseBlock User Remove User Test UserList User Table First Sample Command and ResponseUser ID Second Sample Command and ResponseBlocked? Permanent?Third Sample Command and Response Restrid CR Change RestrictionStarthhmm Endhhmm Dayno N t a LR List RestrictionsRestriction ID Start TimeUR User Restrictions LH Log History Fields of the Log History screen are Duration AH Access HistoryDevice # Reason FH Failure HistoryDate Time User ID Device # ST Status Display LS List Statistics FC Force Connect RS Reset StatisticsDate Set FD Force DisconnectID Set Clock SetSC Set Communications Parameters Sample Help Request and Help Response Help ScreensRpsd Key Use Rpsd Key Use Last Call Status Test Access Failure MessagesRpsd Key User Command Set Set Secret Key Set User IDList User Information Set Device NumberHistory Display 08/14/90 08/14/90 131413 Date Changed OK Set Log ID RPSD/KEY11 Status Display10RPSD Key Use Wipe Out Troubleshooting Troubleshooting 2Troubleshooting Access Failure Messages Check described in Testing the Rpsd Lock Access Failure Messages Code Meaning Action 6Troubleshooting Built-in Diagnostics Testing the Rpsd LockLast Call Status Test Self CheckModem Ring Test Hardware ReplacementReplacing the PBX Modem Replacing the Lock or Key 12Troubleshooting Saving the Key Seed Value Cables, Connectors, and Ports Table Xxxxxx PBX Device LEDs Figure B-1 Front Panel LEDsAT&T Definity Rpsd Table B-2 Index Index2Index Index