LS - List Statistics
Syntax:
ls [ RETURN ]
The List Statistics command displays a statistical summary of call attempts and failures, both cumulative and since the last time the statistical summary was reset. The summary is reset by the administrator using the Reset Statistics command, described in this section.
Sample Command and Response:
> ls
|
|
|
|
|
|
| Since Last Reset | Cumulative | ||
Successful Authentications | 19 | 142 | ||||||||
|
|
| ||||||||
Failed Attempts by Reason | 1 | 1 | ||||||||
(1) | No | RPSD/Key | Detected | |||||||
0 | 0 | |||||||||
(2) | No | Response |
| |||||||
| 0 | 0 | ||||||||
(3) | Invalid | User | ID | |||||||
1 | 2 | |||||||||
(4) | Blocked | User |
| |||||||
| 1 | 1 | ||||||||
(5) | Invalid | Response | ||||||||
3 | 14 | |||||||||
(6) | Outgoing | Call | ||||||||
1 | 1 | |||||||||
(7) | Ring | - | No | Answer | ||||||
2 | 3 | |||||||||
(8) | Force | Disconnect | ||||||||
2 | 1 | |||||||||
(9) | Restricted Time | |||||||||
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| |
The fields of the List Statistics screen are:
Last Reset
Successful Authentications
Failed Attempts by Reason
Gives the date that the statistics kept in the Since Last Reset field were reset to 0. Cumulative statistics are never reset to 0.
Provides the number of times that a caller was successfully authenticated by the Lock since the last time the statistics were reset and also cumulatively since the Lock was installed.
Provides the number of times that a caller failed in an access attempt for each of the nine failure reasons. The statistics are broken down into the number of failures since the last reset and also the cumulative total since the Lock was installed. For a more detailed explanation of the causes of failure, see Table
RPSD System Administrator Command Set |