AT&T Remote Port Security Device user manual Status Display, RPSD/KEY11

Page 84

S - Status Display

Syntax:

s[ RETURN ]

The Status Display command displays the current status of the RPSD Key to the user’s terminal.

To use this command, enter s [ RETURN ] at the > prompt.

Sample Command and Response:

>s
AT&T	RPSD/KEY11 -		V1.0	Firmware	V2.0x	Init Code:
Current		Date: Mon	08/14/90	Time:	14:28:09	Log ID: 12345678
Comms	Set to: 9600/8N
Current		Status: Idle

The fields of the Status Display screen are:

AT&T	Gives the version number of the equipment and the Key user ID.
RPSD/KEY11
Firmware	Gives the version number of the firmware.
Init Code	Tells where and when the device was initialized.
Current Date	Gives the current date. If the date is wrong, it can be corrected using the
	Date Set command described in this section.
Time	Gives the current time. If the time is wrong, it can be corrected using the
	Time Set command described in this section.
Log ID	Provides the Log ID of the RPSD Key. To set a Log ID, use the Set Log ID
	command described in this section.
Comms Set to	Displays the setting of the communications parameters. To change the
	communications parameters, use the Set Communications Parameters
	command described in this section. The default setting is 9600 baud at
	8 bits, no parity.
Current Status	Provides the current status of the Key.

RPSD Key User Command Set

4-9

Image 84

Contents AT&T Trademark Notice Important Safety Instructions Important Safety Instructions FCC Notices Part 15, Subpart aPart Contents Rpsd System Administration Troubleshooting Cables, Connectors, and Ports TableRpsd Key Use Device LEDsList of Figures List of Tables Getting Started Getting Started Protection Process Rpsd Lock and Key Configuration Audience ResponsibilitiesThis Document Typographical ConventionsHotline or Other Service Call Numbers/Addresses 800Installation Installation 2Installation Power Supply Room Layout/EnvironmentLocation of Administration Terminal or Printer Hardware Components Rpsd LockRpsd Power Monitor Adapter Bypass Connections PBXs Rpsd Lock or Key Administration Terminal Rpsd Lock Administration PrinterOther ModemsRpsd Key Hardware Installation Procedures Installing the Rpsd LockCommon Rpsd Lock Configuration Connecting the Rpsd Lock to the CO Line Connecting the Rpsd Lock to the PBX Modem Rpsd Lock to Modem Rpsd Rpsd Lock to Administratlon Terminal or Printer DTE Powering Up the Rpsd Lock Installing the Rpsd Key Connecting the Rpsd Key to the Terminal Connecting the Rpsd Key to the ModemPowering Up the Rpsd Key Testing an Uninitialized Key Power-Up Behavior of Uninitialized KeyCables, Connectors, and Ports Table PBX24Installation Aux. Port Settings Software ComponentsInitializing the Rpsd Lock Initializing an Rpsd Key Test Rpsd Lock Installation Rpsd System Administration Time of Day Access System Activity Log Fields of the System Activity Log entries are Single Point Administration Enable/Disable Block AT&T and Other Key UsersForce Connect/Disconnect Authorized Keys 6RPSD System Administration Rpsd System Administrator Command Set Add UserSyntax Sample Command and Response Without Optional Secret Key Sample Command and Response With Optional Secret KeySample Command and Response Block UserUnblock User Test User Remove UserFirst Sample Command and Response List User TableSecond Sample Command and Response User IDBlocked? Permanent?Third Sample Command and Response CR Change Restriction RestridStarthhmm Endhhmm Dayno LR List Restrictions N t aRestriction ID Start TimeUR User Restrictions LH Log History Fields of the Log History screen are AH Access History Device #Duration FH Failure History Date Time User ID Device #Reason ST Status Display LS List Statistics RS Reset Statistics FC Force ConnectFD Force Disconnect Date SetClock Set ID SetSC Set Communications Parameters Help Screens Sample Help Request and Help ResponseRpsd Key Use Rpsd Key Use Access Failure Messages Last Call Status TestRpsd Key User Command Set Set User ID Set Secret KeySet Device Number List User InformationHistory Display 08/14/90 08/14/90 131413 Date Changed OK Set Log ID Status Display RPSD/KEY1110RPSD Key Use Wipe Out Troubleshooting Troubleshooting 2Troubleshooting Access Failure Messages Check described in Testing the Rpsd Lock Access Failure Messages Code Meaning Action 6Troubleshooting Testing the Rpsd Lock Built-in DiagnosticsSelf Check Last Call Status TestHardware Replacement Modem Ring TestReplacing the PBX Modem Replacing the Lock or Key 12Troubleshooting Saving the Key Seed Value Cables, Connectors, and Ports Table Xxxxxx PBX Device LEDs Front Panel LEDs Figure B-1AT&T Definity Rpsd Table B-2 Index Index2Index Index