AT&T Remote Port Security Device user manual AT&T Definity Rpsd

Table B-1 explains the status of the RPSD Lock when the different LEDs are lit.

TABLE B-1

RPSD Lock LEDs

			LED				Meaning
1	2	3	4	5	6	7
On	On	Off	Off	Off	Off	Off	An incoming call is being processed.
On	Off	On	Off	Off	Off	Off	The RPSD Lock is ringing the modem.
On	Off	Off	On	Off	Off	Off	An outgoing call is in progress from
							the modem.
On	Off	Off	Off	On	Off	Off	The Lock is idle and in a ready
							condition, able to
							accept incoming calls
							or process outgoing calls.
On	Off	Off	Off	Off	On	Off	An incoming call is being authenticated
							for permission to
							access the RPSD
							Lock.
On	Off	Off	Off	Off	Off	On	An incoming call has been
							authenticated, passed to the PBX,
							and is in progress.

RPSD Key

AT&T DEFINITY RPSD KEY

O	O O	O	O	O O
POWER	RING	CALL	IDLE	VERIFY CONNECTED
	IN	OUT

FIGURE B-2

RPSD Key LEDs

The first LED on the left is the red Power light. This indicates that the power is on. This LED should remain lit whenever the RPSD Lock is plugged into an electrical outlet.

When first powered up, the LEDs should all blink on and off in unison three times, then settle into a Locked condition.

B-2Device LEDs