AT&T Remote Port Security Device user manual Clock Set, ID Set

Page 72

C - Clock Set

Syntax:

c <hh:mm> [ RETURN ]

Set the clock to local time standards in 24 hour clock format (for example, 16:00 for 4:00 PM). The clock must be set in order to ensure the accuracy of the System Activity Log and also because the clock is used by the RPSD Lock for enabling and disabling time restrictions.

Be certain to use a colon (:) to separate the hours and minutes. Also be certain to use a leading zero if setting the time less than 10:00.

Sample Command and Response:

> c 13:15

JPLock01 199 08/17/90 15:15:00 Time Changed OK

I - ID Set

Syntax:

i <log_id> [ RETURN ]

The ID set command is used to set a unique identifier for the RPSD Lock. It is useful in the event that more than one RPSD Lock is in operation. The Lock’s ID is added to the beginning of all message output so that the administrator can identify the Lock concerned.

In the syntax above, i is the command and <log_id> is the name selected by the system administrator to identify the Lock.

To clear the ID, enter i

The Log ID is limited to 8 alpha/numeric characters.

Sample Command and Response:

> i JPLock02

JPLock02 004 08/17/90 15:42:21 Log ID Changed OK

>

Note that in the sample the ID is appended to the beginning of the status message. This is where it will appear on all status messages once the ID is set.

3-26RPSD System Administration

Image 72

Contents AT&T Trademark Notice Important Safety Instructions Important Safety Instructions FCC Notices Part 15, Subpart aPart Contents Rpsd System Administration Troubleshooting Cables, Connectors, and Ports TableRpsd Key Use Device LEDsList of Figures List of Tables Getting Started Getting Started Protection Process Rpsd Lock and Key Configuration Audience ResponsibilitiesThis Document Typographical ConventionsHotline or Other Service Call Numbers/Addresses 800Installation Installation 2Installation Power Supply Room Layout/EnvironmentLocation of Administration Terminal or Printer Hardware Components Rpsd LockRpsd Power Monitor Adapter Bypass Connections PBXs Rpsd Lock or Key Administration Terminal Rpsd Lock Administration PrinterOther ModemsRpsd Key Hardware Installation Procedures Installing the Rpsd LockCommon Rpsd Lock Configuration Connecting the Rpsd Lock to the CO Line Connecting the Rpsd Lock to the PBX Modem Rpsd Lock to Modem Rpsd Rpsd Lock to Administratlon Terminal or Printer DTE Powering Up the Rpsd Lock Installing the Rpsd Key Connecting the Rpsd Key to the Terminal Connecting the Rpsd Key to the ModemPowering Up the Rpsd Key Testing an Uninitialized Key Power-Up Behavior of Uninitialized KeyCables, Connectors, and Ports Table PBX24Installation Aux. Port Settings Software ComponentsInitializing the Rpsd Lock Initializing an Rpsd Key Test Rpsd Lock Installation Rpsd System Administration Time of Day Access System Activity Log Fields of the System Activity Log entries are Single Point Administration Enable/Disable Block AT&T and Other Key UsersForce Connect/Disconnect Authorized Keys 6RPSD System Administration Rpsd System Administrator Command Set Add UserSyntax Sample Command and Response Without Optional Secret Key Sample Command and Response With Optional Secret KeySample Command and Response Block UserUnblock User Test User Remove UserFirst Sample Command and Response List User TableSecond Sample Command and Response User IDBlocked? Permanent?Third Sample Command and Response CR Change Restriction RestridStarthhmm Endhhmm Dayno LR List Restrictions N t aRestriction ID Start TimeUR User Restrictions LH Log History Fields of the Log History screen are AH Access History Device #Duration FH Failure History Date Time User ID Device #Reason ST Status Display LS List Statistics RS Reset Statistics FC Force ConnectFD Force Disconnect Date SetClock Set ID SetSC Set Communications Parameters Help Screens Sample Help Request and Help ResponseRpsd Key Use Rpsd Key Use Access Failure Messages Last Call Status TestRpsd Key User Command Set Set User ID Set Secret KeySet Device Number List User InformationHistory Display 08/14/90 08/14/90 131413 Date Changed OK Set Log ID Status Display RPSD/KEY1110RPSD Key Use Wipe Out Troubleshooting Troubleshooting 2Troubleshooting Access Failure Messages Check described in Testing the Rpsd Lock Access Failure Messages Code Meaning Action 6Troubleshooting Testing the Rpsd Lock Built-in DiagnosticsSelf Check Last Call Status TestHardware Replacement Modem Ring TestReplacing the PBX Modem Replacing the Lock or Key 12Troubleshooting Saving the Key Seed Value Cables, Connectors, and Ports Table Xxxxxx PBX Device LEDs Front Panel LEDs Figure B-1AT&T Definity Rpsd Table B-2 Index Index2Index Index