Maxon Telecom MM-6280IND manual +Icf, TE2-MT2, +Ifc

4800, 9600, 19200), (45, 50, 75, 110, 150, 300, 600, 38400, 57600, 115200, 230400)

+IPR=<value> Set value

		TE2-MT2	Character Framing. This extended-format	supported
		compound parameter is used to determine the local serial
		port start-stop (asynchronous) character framing that the
		MT2 shall use while accepting TE2 command set and while
		transmitting information text and result codes to the TE2, if
		this is not automatically determined (see +IPR).
		<format>	valid numeric values
		0	auto detect [NOT SUPPORTED]
		1	8Data 2Stop
		2	8Data 1Parity 1Stop
		3	8Data 1Stop (Default)
		4	7Data 2Stop
+ICF	Opt.
		5	7Data 1Parity 1Stop
		6	7Data 1Stop
		<parity>	defined numeric values
		0	odd
		1	even
		2	Mark [NOT SUPPORTED]
		3	space (Default)

+ICF? Shows current settings +ICF=? Shows supported range

		+ICF=<format_value,parity_value> sets value
		TE2-MT2	Local Flow Control.	This extended-format	supported
		compound parameter is used to control the operation of
		local flow control between the TE2 and MT2 [1].
		<c_by_t>	Description
		0	None
+IFC	Opt.	1	Xon/Xoff local
			DC1/DC3 on circuit 103; do not pass
			DC1/DC3 characters to the remote
			DCE.
		2	Circuit 133 (Ready for Receiving)
			(Default)
HSDPA Standard At Commands			Page 13 of 60	Version 1.2